Abstract:A hybrid 3D-1D-3D approach is proposed for the conceptual design of a blanket. Firstly, the neutron wall loading (NWL) of each blanket module is obtained through a neutronics calculation employing a 3D model, which contains the geometry outline of in-vacuum vessel components and the exact neutron source distribution. Secondly, a 1D cylindrical model with the blanket module containing a detailed radial building is adopted for the neutronics analysis, with the aim of calculating the tritium breeding ratio (TBR) and nuclear heating. Being normalized to the NWL, the nuclear heating is transferred to a 2D model for thermal-hydraulics analysis using the FLUENT code. Through a series analysis of nuclear-thermal iterations that considers the tritium breeding ratio (TBR) and thermal performance as optimization objectives, the optimized radial building of each module surrounding plasma can be obtained. Thirdly, the 3D structural design of each module is established by adding side walls, cover plates, stiffening plates, and other components based on the radial building. The 3D neutronics and thermal-hydraulics using the detailed blanket modules are re-analyzed. This approach has been successfully applied to the design of a water-cooled ceramic breeder blanket for the Chinese Fusion Engineering Test Reactor (CFETR). The radial building of each blanket module surrounding plasma is optimized. The global tritium breeding ratio (TBR) calculated by the 3D neutronics analysis is 1.21, and the temperature of all materials in the 3D blanket structure is below the upper limits. As indicated by the comparison of the 1D and 3D neutronics and thermal hydraulics analyses, the front zones adjacent to plasma present larger deviatiOns of nuclear heat, namely 45% and 36.5%, in tungsten and FW, respectively. The breeder zones, which influence the overall temperature, achieve significantly smaller deviations of less than 10%. The temperature of the 2D model in the front breeder zones is consistent with the results of the 3D model, and the deviation is only 9.2%. The largest deviation 35% occurs in the back breeder zone, because the manifolds are arranged there in the 3D blanket model, and this makes the temperature of the breeder much lower. These results provide a useful reference for further optimization design. (C) 2016 Elsevier B.V. All rights reserved.

An Optimized CFD Method for Conceptual Flow Design of Water Cooled Ceramic Blanket

Numerical Analysis of Heat Transfer in the First Wall of CFETR WCSB Blanket

CFD Analysis of Flow Distributions and Pressure Drops in the Whole CFETR WCCB Blanket Module with Different Turbulence Models

Thermo-mechanical Assessment of the Optimized CFETR Water Cooled Ceramic Breeder Blanket

Cfd Application To Subcooled Boiling Analyses On The First Wall Of Wccb Blanket For Cfetr

Modeling and Multi-Pipe Manifolds Optimization of the WCCB Blanket Sector for CFETR

Numerical simulation of a blanket cooling system for fusion reactor based on PWR conditions

Preliminary Analysis of Flow and Heat Transfer Characteristics of WCSB Blanket Module First wall

Development of neutronic-thermal hydraulic-mechanic-coupled platform for WCCB blanket design for CFETR

Numerical simulation and design optimization of a circulating water channel on hydrodynamic flow performance

Using One Hybrid 3D-1D-3d Approach for the Conceptual Design of Wccb Blanket for Cfetr

Optimization of a WCCB Blanket Module with Detached First Wall for CFETR

Study on Flow Distribution of Coolant Pipes for WCSB Module

Conceptual Design and Coupled Neutronic/thermal-Hydraulic/mechanical Research of the Supercritical Water Cooled Ceramic Blanket for CFETR

Advanced CFD modeling of rod bundle channels with integrated porous media and momentum source schemes

Thermal-hydraulic computation and analysis for helium cooling ceramic blanket of HCCB-DEMO

Numerical Studies on the Heat Transfer and Friction Characteristics of the First Wall Inserted with the Screw Blade for Water Cooled Ceramic Breeder Blanket of Cfetr

Design and analysis of the equatorial inboard WCCB blanket module for CFETR

Simulating conjugate heat and mass transfer by the advanced perforated wall model for effusion cooling

Flow Distribution Analysis of Water-Cooled Solid Breeder Test Blanket Module

CFD Investigation of the Cold Wall Effect on CHF in a 5 × 5 Rod Bundle for PWRs