Abstract:The MnOx-CeO2 metal oxides are considered as promising alternative catalysts for selective catalytic reduction with NH3 (NH3-SCR) to remove NOx due to its excellent low-temperature performance. However, their strong oxidative ability can lead to NH3 over-oxidation, narrowing the active temperature range and reducing N2 selectivity. Moreover, their weak surface acidity hampers medium to high-temperature activity and alkali metal resistance. Hence, in this study, MnCeOx metal oxides were coupled with HY zeolite to create MnCeOx/HY, demonstrating excellent NH3-SCR performance. The high dispersion of metal oxides on the zeolite surface and their close integration promoted strong electron interaction, effectively reducing oxygen vacancies and surface adsorbed oxygen concentrations. Consequently, the oxidative ability of active metal oxides was appropriately weakened, suppressing undesirable side reactions. MnCeOx/HY also notably suppressed NO adsorption and nitrate formation, promoting the catalytic reaction solely through the E-R mechanism and enhancing N2 selectivity. The abundant strong acid sites on the zeolite surface facilitates NH3 adsorption at moderate to high temperatures, notably expanding the active temperature window. Furthermore, the acid sites of HY zeolite serve as sacrificial sites, preferentially reacting with alkali metals, thus exhibiting excellent resistance to alkali metal poisoning on MnCeOx/HY. Combining with the DFT results, the structure-activity relationships in this study also reveal the importance of the effective synergy between acid sites and redox sites for optimal catalytic performance, offering valuable insights into the development of highly active and alkali-resistant denitrification catalysts.

Novel Fe-Ce-O mixed metal oxides catalyst prepared by hydrothermal method for Hg0 oxidation in the presence of NH3

MoO3-adjusted Δ-Mno2 Nanosheet for Catalytic Oxidation of Hg0 to Hg2+

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Mechanistic Investigation on the Hg0 Elimination Ability of MnOx–CeOx Nanorod Adsorbents: Effects of Mn/Ce Molar Ratio

Improvement of NH3 resistance over CuO/TiO2 catalysts for elemental mercury oxidation in a wide temperature range

Effect of CeO2 and Pt introduction on the structure and performance of Fe2O3 for Hg0 removal

Promoting Metal Oxides–zeolite Electron Interaction on MnCeOx/HY Catalyst for Boosting Nitrogen Oxides Reduction

New Insights into the Promotional Effects of Cu and Fe over V2O5-WO3/TiO2 NH3-SCR Catalysts Towards Oxidation of Hg0

Ce–Fe–Mn Ternary Mixed-Oxide Catalysts for Catalytic Decomposition of Ozone at Ambient Temperatures

Catalytic Oxidation of Hg0 with O2 Induced by Synergistic Coupling of CeO2 and MoO3.

Improvement in the Hg0 removal performance of CeO2 by modifying with CuO

Mn doped CeO2-MoO3/γ-Al2O3 catalysts for the enhanced adsorption and catalytic oxidation of Hg0 in oxygen atmosphere

Promoting SO2 Resistance of a CeO2(5)-WO3(9)/TiO2 Catalyst for Hg0 Oxidation Via Adjusting the Basicity and Acidity Sites Using a CuO Doping Method

Synergistic catalytic oxidation of Hg0 and NH3-SCR of NO over MnCeTiOx catalyst in flue gas

Fe–Ce Mixed Oxides Supported on Carbon Nanotubes for Simultaneous Removal of NO and Hg0 in Flue Gas

Ce-promoted Ni-NiO Small Ensemble Constrained in an MgO Catalyst for Efficient Hydrogen Production Through NH3 Decomposition

Hg0 Catalytic Oxidation by HBr over Ce-modified Regenerated Selective Catalytic Reduction Catalyst

Relationship between Hg0 capture performance and physicochemical properties of CeO2-CrOx mixed oxides

FeCeOx with Improved Activity for Catalytic Reduction of NO with NH3

Experimental Research on Mercury Catalytic Oxidation over Ce Modified SCR Catalyst

CeO2 based catalysts for elemental mercury capture