Abstract:Cobalt-nickel (Co-Ni) free Lithium-rich cathode material (1 − x)Li2MnO3·xLiFeO2 is more environmental friendly and cheaper than other traditional cathode materials. However, the complex synthesis method limits its large-scale practical application. This work explores a simple dry synthesis route to directly obtain 0.7Li2MnO3·0.3LiFeO2 with good electrochemical performance. Calcination temperature is a key factor controlling the phase growth. With the calcination temperature increasing, the crystallization and ordered layered structure are improved, but the LiFe5O8 spinel phase appears in X-ray diffraction (XRD) patterns from 600 °C. The results of selected area electron diffraction (SAED), element mapping (EDS) and vibrating sample magnetometer (VSM) demonstrate convincingly the growth progress of LiFe5O8 as the temperature rises. The spinel phase deteriorates the electrochemical performance. Furthermore, it is proved that the crystallization and activity of Li2MnO3 precursor are effective to retard the formation of LiFe5O8 and enhance the electrochemical performance. The sample calcined at 600 °C exhibits a high initial capacity above 200 mAh g−1, but capacity fades quickly to 120 mAh g−1 after 50 cycles at 0.2 C. The sample calcined at 650 °C with a little LiFe5O8 delivers a low initial capacity about 160 mAh g−1, but stabilizes at 160 mAh g−1 after 50 cycles. Therefore, how to control the formation of thermally stable phase LiFe5O8 is an important issue, and it needs further investigation to achieve Co-Ni free Li-rich cathode materials with excellent performance. Significantly, the simple synthesis and acceptable electrochemical properties make the practical application of Fe-Mn based Li-rich material possible.

Grain Growth Kinetics of LiMn2O4 Nanocrystals During Calcining Process

Nano CaO Grain Characteristics and Growth Model under Calcination

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

Grain Growth Kinetics of SnO 2 Nanocrystals Synthesized by Precipitation Method

Effects of Fuel Content and Calcination Procedure on Phase Composition and Microstructure of LiMn<sub>2</sub>O<sub>4</sub> Prepared by Solution Combustion Synthesis

Grain Growth in (ga, Mn)-Codoped ZnO Ceramics

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Elucidating the Mechanical-Electrochemical Interactions in Single Crystalline LiNi0.7Co0.1Mn0.2O2 Cathode Material During Solid-State Calcination

Temperature-dependence of calcination processes of Ni-rich layered oxides

Elucidating the Mechanical-Electrochemical Interactions in Single Crystalline LiNi 0 . 7 Co 0 . 1 Mn 0 . 2 O 2 Cathode Material During Solid-State Calcination

The Calcination Temperature Effect on Crystal Structure of LiNi1/3Mn1/3Co1/3O2 Cathode Material for Lithium-Ion Batteries

Synthesis and Characterization of Single Crystalline Mnooh and Mno2 Nanorods by Means of the Hydrothermal Process Assisted with Ctab

Grain Growth Characteristics of Hydrothermally Prepared Yttria Stabilized Zirconia Nanocrystals during Calcination

Influence of Calcinations Temperature on Crystallization and Synthesis Process of Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>

Topotactic Phase Transformation of Lithiated Spinel to Layered LiMn0.5Ni0.5O2: The Interaction of 3-D and 2-D Li-ion Diffusion

Grain growth competition during sintering of SrTiO3 nanocrystals: Ordered coalescence of nanocrystals versus conventional mechanism

Effect of Fuel Content and Temperature on Spinel LiMn2O4 Prepared by Solid-State Combustion Synthesis

Electrochemical Performance of Nanosized LiMn2O4 for Lithium-Ion Batteries

Insight into the microscopic morphology and electrochemical performance correlation mechanism upon calcination at different temperatures of a novel spherical cobalt-free 0.6Li 2 MnO 3 ·0.4Li[Fe 1/3 Ni 1/3 Mn 1/3 ]O 2 cathode

Temperature-controlled direct dry synthesis of Co-Ni free cathode materials 0.7Li2MnO3·0.3LiFeO2 for lithium-ion batteries

Physical Properties and Electrochemical Performance of Limn2o4 Cathode Materials Prepared by A Precipitation Method