Abstract:This study investigates the structural evolution of LiMn0.5Ni0.5O2 cathode materials for Li-ion batteries as a function of synthesis temperature and its effect on electrochemical performance. It is demonstrated that, as the synthesis temperature increases from 400 to 900 °C, a gradual topotactic transformation occurs between a lithiated spinel structure, denoted herein as "lithium-excess spinel" LxS-LiMn0.5Ni0.5O2 (or LxS-LMNO), and the well-known layered LiMn0.5Ni0.5O2 structure prepared at high temperature, HT-LiMn0.5Ni0.5O2 (HT-LMNO). The electrochemical capacity of the LiMn0.5Ni0.5O2 electrodes follows a parabolic trend with increasing synthesis temperature, which is attributed primarily to the gradual transformation of 3-dimensional (3-D) to 2-dimensional (2-D) diffusion pathways for the Li ions. When synthesized at 400 °C, LxS-LiMn0.5Ni0.5O2 electrodes perform well, benefitting from the 3-D network of channels within the LxS structure. By contrast, when prepared at 500-700 °C, LiMn0.5Ni0.5O2 electrodes operate poorly, which is attributed to the formation of locally disordered structural arrangements that impede Li-ion diffusion. Such an increase in local disorder in the mid-temperature synthesis range is attributed to the structural frustration between the lithium-excess spinal and layered end-members. The transformation from the locally disordered to more ordered layered components between 700 °C and 900 °C enhances electrochemical performance. The study opens new avenues for designing next-generation Mn-rich cathode materials by fine-tuning the synthesis conditions as well as the composition and structure of LxS-LMNO electrodes.

Effects of Fuel Content and Calcination Procedure on Phase Composition and Microstructure of LiMn<sub>2</sub>O<sub>4</sub> Prepared by Solution Combustion Synthesis

Effect of Fuel Content and Temperature on Spinel LiMn2O4 Prepared by Solid-State Combustion Synthesis

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Solution combustion synthesis of LiMn2O4 with different starting reactant compositions

Effect of citric acid on spinel LiMn2O4 prepared by solution combustion synthesis

Preparation of LiMn2O4 by Low Temperature Molten-Combustion Method

The Calcination Temperature Effect on Crystal Structure of LiNi1/3Mn1/3Co1/3O2 Cathode Material for Lithium-Ion Batteries

Topotactic Phase Transformation of Lithiated Spinel to Layered LiMn0.5Ni0.5O2: The Interaction of 3-D and 2-D Li-ion Diffusion

Evolution of Spinel LiMn 2 O 4 Single Crystal Morphology Induced by the Li 2 MnO 3 Phase during Sintering

Preparation and electrochemical performance of LiNi0.5Mn1.5O4 spinels with different particle sizes and surface orientations as cathode materials for lithium-ion battery

Physical properties and electrochemical performance of LiNi0.5Mn1.5O4 cathode material prepared by a coprecipitation method

Preparation and Electrochemical Performance of Spinel LiAl0.08Co0.05Mn1.87O4 Cathode Materials for Long Cycle Life Lithium-ion Batteries

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

The effects of calcination on the electrochemical properties of manganese oxides

Preparation of Spinel LiMn2O4 from Manganese Oxide and Its Electrochemical Performance

Effects of Ni-ion Doping on Electrochemical Characteristics of Spinel LiMn2O4 Powders Prepared by a Spray-Drying Method

Optimum Synthesis of Spinel Phase LiMn_2O_4 by Rheological Phase Reaction Method

Electrochemical performance of LiMn2O4 synthesized from precursor Mn3O4

Insight into the Microscopic Morphology and Electrochemical Performance Correlation Mechanism Upon Calcination at Different Temperatures of a Novel Spherical Cobalt-Free 0.6li2mno3?0.4li[fe1/3ni1/3m N1/3]o2 Cathode

The Effect of the Calcination Time on the Microstructure and Properties of MnZn Ferrite Powders