Abstract:Directed relation graph with error propagation (DRGEP) method combined with extensive validation for 0D, 1D and 2D CFD modeling supported by sensitivity and Rate-Of-Production (ROP) analyses are implemented for comparative study of detailed and reduced kinetic mechanisms for CH4+ H-2 combustion. To this end, two detailed kinetic mechanisms, namely AramcoMech 2.0 and recently updated Konnov mechanism, were validated using available measurements of ignition delay times and laminar burning velocities for hydrogen, methane and hydrogen+ methane fuel mixtures. For all experimental conditions visited, both detailed mechanisms demonstrated good and close to each other performance. Two-stage DRGEP method and reaction reduction based on computational singular perturbation (CSP) were then implemented to achieve two skeletal models: 25 species and 105 reactions for AramcoMech 2.0 and 27 species and 107 reactions for the Konnov model. The conditions for skeletal models generation cover.= 0.5-2.0, temperature 900-2000 K, and pressure 1-50 bar. Turbulent non-premixed flames of CH4+ H-2 in the Jet in Hot Co-flow (JHC) burner for two different oxygen concentrations in a co-flow were modeled using both skeletal models. 2-D RANS simulations with OpenFOAM code of the flame structure using the two skeletal kinetic mechanisms are similar except for the mass fraction of OH and CO. To elucidate the differences between two skeletal mechanisms generated using the same reduction method, extensive validation for 0D, 1D and 2D CFD modeling were supported by sensitivity analysis for detailed and skeletal reaction models. Good agreement between the skeletal and detailed mechanisms was found in top reactions as well as their sensitivity coefficients, which affect auto-ignition process and laminar flame propagation. Further chemical and sensitivity analysis of the structure of laminar flames demonstrate that three important reactions, i.e. CO+ OH= CO2+ H, H-2+ OH= H+ H2O, and CH4+ OH= CH3+ H2O have different rate constants in the Aramco and Konnov models that may contribute to the differences in the prediction of CO concentration profiles. The simulation predictions for CO concentrations are improved for laminar flames and JHC flame by using a 25-species modified version in which these rate constants were taken from the Konnov mechanism. It was noted that DRGEP method applied to different detailed kinetic schemes generate skeletal models with different, non-overlapping lists of retained species. The presence of CH2CHO in the Aramco 25-species skeletal mechanism and its absence in the Konnov 27-species mechanism, and the presence of CH, CH2, CH2CO in the latter and their absence in the former mechanism were analysed and explained using Rate-OfProduction analysis for conditions found in the CFD simulations.

A Comprehensive Study of Light Hydrocarbon Mechanisms Performance in Predicting Methane/Hydrogen/Air Laminar Burning Velocities

Development and Verification of Simplified Methane/dimethyl Ether Mechanism for Micro-Combustion

Comparative Analysis of Detailed and Reduced Kinetic Models for CH4 + H2 Combustion

Laminar Flame Speeds and Ignition Delay Times of Methane–air Mixtures at Elevated Temperatures and Pressures

A Chemical Kinetic Investigation of Laminar Premixed Burning Characteristics for Methane-Hydrogen-air Mixtures at Elevated Pressures

Comparison of methane combustion mechanisms using laminar burning velocity measurements

Comparison of Kinetic Mechanisms for Numerical Simulation of Methanol Combustion in DICI Heavy-Duty Engine

Numerical analysis of laminar burning velocity of hydrogen and carbon monoxide-enriched natural gas (HyCONG) blends

Numerical Investigation of Laminar Burning Velocity for Methane-Hydrogen-air Mixtures at Wider Boundary Conditions

Experimental and Kinetic Modeling Study of Laminar Burning Velocities of NH3/air, NH3/H2/air, NH3/CO/air and NH3/CH4/air Premixed Flames

Numerical Analysis Selecting Chemical Mechanism of Ammonia-Hydrogen Mixture Laminar Burning Velocity by RMSE

Laminar Flame Speed of Methane/Air at Engine-Relevant Conditions: Performance of Different Mechanisms

Adaptability of different mechanisms and kinetic study of methane combustion in steam diluted environments

Experimental and Numerical Study of the Laminar Burning Velocity and Pollutant Emissions of the Mixture Gas of Methane and Carbon Dioxide

Model Comparisons of Flow and Chemical Kinetic Mechanisms for Methane–Air Combustion for Engineering Applications

Experimental and kinetic modeling study of the CH4+H2S+air laminar burning velocities at atmospheric pressure

Experimental and Kinetic Modeling Study of the Laminar Burning Velocity of CH4/H2 Mixtures under Oxy-Fuel Conditions

Experimental and modeling study of laminar burning velocity of biomass derived gases/air mixtures

Experimental Study on the Effect of Hydrogen Addition on the Laminar Burning Velocity of Methane/Ammonia-Air Flames

Experimental Study on Ethane Ignition Delay Times and Evaluation of Chemical Kinetic Models

Numerical investigation and prediction models for methanol-air laminar flame speed