Abstract:The general preparation method for V2O5 is ammonium salt vanadium precipitation, which inevitably produces large amounts of ammonia nitrogen wastewater. In this paper, we propose an environmentally friendly method for preparing high-purity V2O5 with low ammonium consumption. The purity of the V2O5 product reaches more than 99% while reducing the level of ammonium consumption. The vanadium precipitation efficiency reaches 99.23% and the V2O5 purity of the product reaches 99.05% under the following conditions: precipitation time of 1.5 h, precipitation temperature of 98 °C, initial precipitation pH of 2, ammonium addition coefficient of 2, purification time of 5 min with purification performed twice, purification temperature of 65 °C. In this study, compared with the use of ammonia spirit for vanadium precipitation and ammonium salt vanadium precipitation, the ammonia consumption levels are reduced by 79.80% and 80.00%, and the purity levels are increased by 0.70% and 1.01%, respectively. The compositions of the precipitated (NaV3O8∙xH2O) and purified ((NH4)2V6O16·1.5H2O) hydrolysis products are characterized via XRD. The TGA results show that NaV3O8∙xH2O contains 1.5 times the amount of crystal water. The FTIR results explain that the two V3O8− layers are combined end-to-end to form a V6O162− layer. The change of the product image indicates that the purification process includes three stages. Firstly, heating and NH4+ attack expand the V3O8− layer. NH4+ diffuses more easily into the V3O8− layer. Secondly, NH4+ destroys the electrostatic interaction between Na+ with the V3O8− layer and replacing Na+. Finally, V3O8− is polymerized into V6O162− to keep the crystal structure stable.

Improving The Productivity And Purity Of Vaterite Produced Via A Refined Bubbling Method

A Green Approach to Preparing Vaterite CaCO3 for Clean Utilization of Steamed Ammonia Liquid Waste and CO2 Mineralization

Producing Vaterite by CO2 Sequestration in the Waste Solution of Chemical Treatment of Recycled Concrete Aggregates

Synthesis of High-Purity Vaterite from Calcium Sulfate and Ammonium Carbonate

Effect of pH and temperatures on the fast precipitation vaterite particle size and polymorph stability without additives by steamed ammonia liquid waste

Solvothermal growth of vaterite in the presence of ethylene glycol, 1,2-propanediol and glycerin

Purifying Technology of Preparing High Purity Quartz Sands from Vein Quartz Ore

Purification and Carbonation for High Loss and Low-Grade Diatomite in Inner Mongolia

A Sustainable Technique to Prepare High-Purity Vanadium Pentoxide via Purification with Low Ammonium Consumption

Impact of Impurities on Vivianite Crystallization for Phosphate Recovery from Process Water of Hydrothermal Carbonization of Kitchen Waste

Ultrahigh Purity CaCO3 Whiskers Derived from the Enhanced Diffusion of Carbonate Ions from a Larger Liquid–gas Interface Through Porous Quartz Stones

Renewable ammonium chloride-induced calcium leaching of gold and copper tailings and selective preparation of vaterite CaCO 3 by CO 2 mineralization

High-purity vaterite CaCO 3 recovery through wet carbonation of magnesium slag and leaching residue utilization in cement

Revealing the Mechanism of Quartz Sand Seeding in Accelerating Phosphorus Recovery from Anaerobic Fermentation Supernatant Through Vivianite Crystallization.

Improvement on the Processes of MgO Manufacture

Precipitation and in-situ surface modification of calcium carbonate in synthetic seawater: polymorph control, crystallization kinetics, and hydrophobic vaterite preparation

Growth process and crystallographic properties of ammonia-induced vaterite

Vaterite Microdisc Mesocrystals Exposing the (001) Facet Formed Via Transformation from Proto-Vaterite Amorphous Calcium Carbonate

Glycine-induced synthesis of vaterite by direct aqueous mineral carbonation of desulfurization gypsum

Revealing and quantifying the effect of cattiite coprecipitation on the purity of K-struvite in aqueous solution

Revealing the hydrodynamic effects on phosphorus recovery as vivianite in stirring and aeration systems through PIV experiments and theoretical calculations