Abstract:An energy level offset in organic solar cells (OSCs) is necessary for efficient charge generation and separation. To date, there are several polymer donor–non-fullerene acceptor (NFA) bulk-heterojunction (BHJ) systems with a negligible ionization energy (IE) level offset achieving high power conversion efficiencies (PCEs) over 15%. Although these donor–acceptor pairs perform well in solar cells, there is little understanding on why some systems can achieve this phenomenon, and therefore, many of these BHJs are discovered through a trial-and-error process. Here, we investigate how OSC efficiencies can be modulated by adjusting the IE level offset in a series of PTQ10 n:m random terpolymer donors by means of solar cell performance (open circuit voltage (V OC) and short-circuit current (J SC)) when paired with Y6 and IDIC acceptors. PTQ10’s IE level was adjusted through a copolymerization of thiophene (n), bithiophene (m), and quinoxaline monomer units in different ratios, whereby 10% bithiophene leads to a 0.05 eV decrease in the polymer’s IE. The incorporation of 10% bithiophene (PTQ10 90:10) led to a 1.3 ± 0.5 mA/cm2 increase in J SC when paired with Y6 (PCE = 13.8 ± 0.4%) in conjunction with an incremental decrease in V OC and fill factor (FF) when compared to PTQ10 (PCE = 14.7 ± 0.1%). Increasing the bithiophene content to 20% (PTQ10 80:20) exacerbated the decrease in V OC and FF further without the benefit of increased J SC. The drop in FF with increasing bithiophene incorporation correlated with increasing edge-on orientation in the neat polymer and polymer:Y6 BHJ blend films, shown by grazing-incidence wide-angle X-ray scattering measurements. High-field solid-state (ss)NMR spectroscopy analysis of single component PTQ10, Y6, and PTQ10:Y6 BHJ blends provides a complementary insight into how a low IE level offset system (PTQ10:Y6) imparts high performance. By resolving inter- and intramolecular packing interactions at sub-nanometer distances, ssNMR results offer key insights into the changes in local structures and conformations in the vicinity of the alkoxy PTQ10 side chains and in the Y6 end group in BHJ blends when compared to the neat compounds. Despite the changes in local structures, the BHJ morphology maintains pure D-A domains and preserves the microstructure, which correlates with the high-performing solar cells. A synergic combination of chemical design, multiscale morphology characterization, and device physics shown in this study provides an excellent strategy to investigate the BHJ and its role in organic solar cell performance.

Insight into the Relevance Between the Photovoltaic Performance and Dielectric Properties for Tetraphenyldibenzoperiflanthene Based Mixed Heterojunctions

Comparison of Small Amounts of Polycrystalline Donor Materials in C70-based Bulk Heterojunction Photovoltaics and Optimization of Dinaphthothienothiophene Based Photovoltaic

Comparative Investigation Of Molecular Orientation And Charge Collection In Highly Efficient Mixed Heterojunctions Based On Three Planar-Shaped Donors And C-70

Tetraphenyldibenzoperiflanthene As Sensitizer for Enhancing the Performance in Dinaphthothienothiophene-Based Photovoltaics with and Without Fullerene

The Influence of Donor Material on Achieving High Photovoltaic Response for Organic Bulk Heterojunction Cells with Small Ratio Donor Component

Performance improvement of DBP-based solar cells by introducing a luminescent sensitizer bis[(4,6-difluorophenyl)-pyridinato-N,C2']c(picolinate)iridium(Ⅲ) (Flrpic)

The photovoltaic behaviors of PPV- and PPE-type conjugated polymers featured with diketopyrrolopyrrole (DPP) units

Investigation of the Characteristic of Solution‐Processed Tetraphenyldibenzoperiflanthene (DBP) Film and Its Application on Organic Photovoltaic Cells

Vertical Miscibility of Bulk Heterojunction Films Contributes to High Photovoltaic Performance

Significance of Dopant/Component Miscibility to Efficient N-Doping in Polymer Solar Cells.

A material combination principle for highly efficient polymer solar cells investigated by mesoscopic phase heterogeneity.

Increasing Quantum Efficiency of Polymer Solar Cells with Efficient Exciton Splitting and Long Carrier Lifetime by Molecular Doping at Heterojunctions

The effect of additive on the performance and phase separation of benzo[1,2-b:3,4-b′]dithiophene-based polymer heterojunction photovoltaic devices

Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends

Influence of Molecular Geometry of Perylene Diimide Dimers and Polymers on Bulk Heterojunction Morphology Toward High‐Performance Nonfullerene Polymer Solar Cells

Exploring the impact of solvent additives on dielectric properties in polymer photovoltaics: A deconvolution and in-depth study of electrical modulus, complex conductivity, and impedance responses

Decisive Role of Elevated Mobility in X55 and X60 Hole Transport Layers for High-Performance Perovskite Solar Cells

Intermolecular Interactions, Morphology, and Photovoltaic Patterns in p-i-n Heterojunction Solar Cells With Fluorine-Substituted Organic Photovoltaic Materials

Probing the Energy Level Alignment and the Correlation with Open-Circuit Voltage in Solution-Processed Polymeric Bulk Heterojunction Photovoltaic Devices

Insights into the Local Bulk-Heterojunction Packing Interactions and Donor–Acceptor Energy Level Offsets in Scalable Photovoltaic Polymers

Bridging mesoscopic blend structure and property to macroscopic device performance via in situ optoelectronic characterization