Abstract:Vascularization is essential for the regeneration of three-dimensional (3D) bioprinting organs. As a general method to produce microfluidic channels in 3D printing constructs, coaxial extrusion has attracted great attention. However, the biocompatible bioinks are very limited for coaxial extrusion to fabricate microchannels with regular structure and enough mechanical properties. Herein, a hybrid bioink composed of alginate (Alg) and silk fibroin (SF) was proposed for 3D bioprinting of microchannel networks based on coaxial extrusion. The rheological properties of the bioink demonstrated that the hybrid Alg/SF bioink exhibited improved viscosity and shear thinning behavior compared with either pure Alg or SF bioink and had similar storage and loss modulus in a wide range of shear frequency, indicating a sound printability. Using a coaxial extrusion system with calcium ions and Pluronic F127 flowing through the core nozzle as cross-linkers, the Alg/SF bioink could be extruded and deposited to form a 3D scaffold with interconnected microchannels. The regular structure and smooth pore wall of microchannels inside the scaffold were demonstrated by optical coherence tomography. Micropores left by the rinse of F127 were observed by scanning electron microscope, constituting a hierarchical structure together with the microchannels and printed macropores. Fourier transform infrared spectroscopy analysis proved the complete rinse of F127 and the formation of beta-sheet SF structure. Thus, Alg/SF could form a double cross-linked network, which was much stronger than the pure Alg network. Moreover, cells in the Alg/SF scaffold showed higher viability and proliferation rate than in the Alg scaffold. Therefore, Alg/SF is a promising bioink for coaxial extrusion-based 3D bioprinting, with the printed microchannel network beneficial for complex tissue and organ regeneration.

3D Printing Process for Hydro Gel with the Three-dimensional Micro Tubes to Mimic Vascular Network

Coaxial Nozzle-Assisted 3D Bioprinting with Built-in Microchannels for Nutrients Delivery.

Preparation, Mechanical and Biological Properties of Inkjet Printed Alginate/Gelatin Hydrogel

3D Printing of Complex GelMA-based Scaffolds with Nanoclay

A Biological 3D Printer for the Preparation of Tissue Engineering Micro-Channel Scaffold

Three-Dimensional Bioprinting Of Perfusable Hierarchical Microchannels With Alginate And Silk Fibroin Double Cross-Linked Network

Formation of Stable Vascular Networks by 3D Coaxial Printing and Schiff-Based Reaction

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels

Research on the Printability of Hydrogels in 3D Bioprinting.

3D printed agar/ calcium alginate hydrogels with high shape fidelity and tailorable mechanical properties

Three-Dimensional Cell Culture with Alginate Hetero Gel Microspheres

Coaxial Embedded Printing of Gelatin Methacryloyl–alginate Double Network Hydrogel for Multilayer Vascular Tubes

Engineering gelatin-based alginate/carbon nanotubes blend bioink for direct 3D printing of vessel constructs

Coaxial 3D Bioprinting Process Research and Performance Tests on Vascular Scaffolds

Hybrid 3D printing and electrodeposition approach for controllable 3D alginate hydrogel formation

Mussel-Inspired Naturally Derived Double-Network Hydrogels and Their Application in 3D Printing: from Soft, Injectable Bioadhesives to Mechanically Strong Hydrogels.

3D bioprinting and in vitro study of bilayered membranous construct with human cells-laden alginate/gelatin composite hydrogels.

3D Printing Unique Nanoclay‐Incorporated Double‐Network Hydrogels for Construction of Complex Tissue Engineering Scaffolds

Preparation of Calcium Alginate Hydrogel Based on Electro Induced Deposition Method

Perfusive and Osmotic Capabilities of 3D Printed Hollow Tube for Fabricating Large-Scaled Muscle Scaffold

Preparation And Properties Of 3d Printed Alginate-Chitosan Polyion Complex Hydrogels For Tissue Engineering