Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Design Consideration of Saw/Baw Band Reject Filters Embedded in Impedance Converter

SAW/BAW band reject filters embedded in impedance converter

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Hybrid Integration of BAW Resonators with an On-Chip Inductor to Improve the Stopband Rejection of the N78 Band Filter

Reconfigurable Dual-Band Bandpass-to-Bandstop Filter Using SAW Resonators and Lumped Elements

High-Q Bandpass-to-Bandstop Reconfigurable Filter Based on SAW Resonators

SAW Filter with High Out-of-Band Rejection Using Improved Grounding Method

A Hybrid Transmission-Line/SAW-Resonator Analog Signal-Interference Dual-Band Bandpass Filter

Multimode Filter Composed Of Single-Mode Surface Acoustic Wave/Bulk Acoustic Wave Resonators

Design of Ultra-Wideband Surface Acoustic Wave Filters

High common‐mode rejection balanced bandpass filter using novel coupling scheme and source‐loaded coupling technique

A Compact Half-Mode Substrate Integrated Waveguide Bandpass Filter with Wide Out-of-Band Rejection

Single and Multiband Bandstop Filters with Hybrid Transmission-Line/SAW-Resonator Transversal Filtering Sections

Design of Hybrid Bandpass Filter Chips with High Selectivity and Wideband Using IPD and FBAR Technology

Design of Narrow Bandwidth Elliptic-Type SAW/BAW Filters

Compact Hybrid Bandpass Filter Using Siw And Csrrs With Wide Stopband Rejection

High Selectivity Filtering Power Divider Based on SAW Resonator

Design of 2-Track DMS SAW Filter with Low Loss, High Selectivity and Compact Size for Band-29 Applications

Compact Wideband Bandstop Filter with Directly Controlled Rejection