Abstract:Three amino-containing small-molecule organic materials-biuret, dicyandiamide (DCDA), and urea were successfully applied as novel cathode buffer layers (CBLs) in P3HT:PCBM bulk heterojunction polymer solar cells (BHJ-PSCs) for the first time, resulting in obvious efficiency enhancement. Under the optimized condition, the power conversion efficiencies (PCEs) of the CBL-incorporated BHJ-PSC devices are 3.84%, 4.25%, and 4.39% for biuret, DCDA, and urea, which are enhanced by similar to 15%, similar to 27%, and similar to 31%, respectively, compared to the reference poly(3-hexylthiophene-2,5-diyl) : [6,6]-phenyl-C-61-butyric acid methyl ester (P3HT:PCBM) BHJ-PSC device without any CBL. The efficiency enhancement is primarily attributed to the increases of both short-circuit current density (J(sc)) and fill factor (FF), for which the enhancement ratio is found to be sensitively dependent on the molecular structure of small-molecule organic materials. The surface morphologies and surface potential changes of the CBL-incorporated P3HT:PCBM photoactive layers were studied by atomic force microscopy and scanning Kelvin probe microscopy, respectively, suggesting the formation of an interfacial dipole layer between the photoactive layer and Al cathode, which may decrease the energy level offset between the work function of Al and the lowest unoccipoed molecular orbital level (LUMO) of the PCBM acceptor and consequently facilitate electron extraction by the Al cathode. The difference in the enhancement effect of biuret, DCDA, and urea is due to their difference on the work function matching with P3HT:PCBM. Besides, the coordination interaction between the lone-pair electrons on the N atoms of the amino (-NH2) group and the Al atoms may prohibit interaction between Al and the thiophene rings of P3HT, contributing to the efficiency enhancement of the CBL-incorporated devices as well. In this sense, the different CBL performance of biuret, DCDA, and urea is also proposed to partially originate from the differences on their chemical structure, specifically the number of amino groups.

High-Efficiency Polymer Solar Cells with Sm/Ca Bilayer Cathode Buffers

[6,6]-Phenyl-C61-butyric acid dimethylamino ester as a cathode buffer layer for high-performance polymer solar cells

Efficiency Enhancement of Polymer Solar Cells by Applying an Alcohol-Soluble Fullerene Aminoethanol Derivative As A Cathode Buffer Layer

Crown-Ether Functionalized Fullerene As A Solution-Processable Cathode Buffer Layer For High Performance Perovskite And Polymer Solar Cells

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Effect of CsF Interlayer on the Performance of Polymer Bulk Heterojunction Solar Cells

Synergic Interface and Optical Engineering for High‐Performance Semitransparent Polymer Solar Cells

Solution-processed Bathocuproine Cathode Buffer Layer Towards Efficient Planar Heterojunction Perovskite Solar Cells

Efficiency Enhancement of Polymer Solar Cells by Applying Poly(Vinylpyrrolidone) As A Cathode Buffer Layer Via Spin Coating or Self-Assembly

Application of Biuret, Dicyandiamide, or Urea As a Cathode Buffer Layer Toward the Efficiency Enhancement of Polymer Solar Cells.

Thermo-cleavable Fullerene Materials As Buffer Layers for Efficient Polymer Solar Cells

Large Open-Circuit Voltage Polymer Solar Cells by Poly(3-Hexylthiophene) with Multi-Adducts Fullerenes

Improved High-Efficiency Organic Solar Cells Via Incorporation of a Conjugated Polyelectrolyte Interlayer.

Improved photocurrent of PDPP3T based organic Schottky junctions via solution‐processed HAT‐CN and TPBi as anode and cathode buffer layers (Phys. Status Solidi A 9∕2017)

Bulk heterojunction perovskite solar cells incorporated with p-type low optical gap conjugated polymers

Effect of cathode buffer layer on the stability of polymer bulk heterojunction solar cells

Highly Efficient Polymer Solar Cells Based on a Universal Cathode Interlayer Composed of Metallophthalocyanine Derivative with Good Film-Forming Property

Design and Optimization of High Performance P3HT: PCBM Polymer Solar Cell Using P3HT Buffer Layer

5-Nm LiF As an Efficient Cathode Buffer Layer in Polymer Solar Cells Through Simply Introducing a C60 Interlayer

Bandgap Tunable Zn1‐xMgxO Thin Films as Highly Transparent Cathode Buffer Layers for High‐Performance Inverted Polymer Solar Cells

The Dependence of the Cathode Architecture on the Photoactive Layer Morphology in Bulk-Heterojunction Polymeric Solar Cells