Abstract:The anaerobic digestion of the organic fraction of municipal solid waste and the biogas production obtained from its stabilization are becoming an increasingly attractive solution, due to their beneficial effects on the environment. In this way, the waste is considered a resource allowing a reduction in the quantity of it going to landfills and the derived greenhouse gas emissions. Simultaneously, the upgrading process of biogas into biomethane can address the issues dealing with decarbonization of the transport. In this work, the production of biogas obtained from the organic fraction of municipal solid wastes in a plug flow reactor is analyzed. In order to steer the chemical reactions, the temperature of the process must be kept under control. A new simulation model, implemented in the MatLab® environment, is developed to predict the temperature field within the reactor, in order to assess how the temperature affects the growth and the decay of the main microbial species. A thermal model, based on two equilibrium equations, is implemented to describe the heat transfer between the digester and the environment and between the digester and the internal heat exchanger. A biological model, based on suitable differential equations, is also included for the calculation of the biological processes occurring in the reactor. The proposed anaerobic digestion model is derived by the combination of these two models, and it is able to simultaneously simulate both thermal and biological processes occurring within the reactor. In addition to the thermal energy demand, the plant requires huge amounts of electricity due to the presence of a biogas upgrading process, converting biogas into biomethane. Therefore, the in-house developed model is integrated into a TRNSYS environment, to perform a yearly dynamic simulation of the reactor in combination with other renewable technologies. In the developed system layout, the thermal energy required to control the temperature of the reactor is matched by a solar thermal source. The electrical demand is met by the means of a photovoltaic field. In this work, a detailed thermoeconomic analysis is also proposed to compare the environmental impact and economic feasibility of a biomethane production plant based on a plug flow reactor and fed by renewables. Several economic incentives are considered and compared to determine the optimal solution, both in terms of energy and economic savings. The plant is designed for the treatment of a waste flow rate equal to 626.4 kg/h, and the biomethane produced, approximately 850 tons/years, is injected into the national gas grid or supplied to gas stations. In the proposed plant, a solar field of an evacuated tube collector having a surface of approximately 200 m2 is able to satisfy 35% of the thermal energy demand while over 50% of the electric demand is met with a photovoltaic field of 400 m2. A promising payback time of approximately 5 years was estimated.

Predictive Modelling and Simulation of Integrated Pyrolysis and Anaerobic Digestion Process

Integrated Waste-to-Energy Process Optimization for Municipal Solid Waste

Pyrolysis of Difficult Biodegradable Fractions and the Real Syngas Bio-Methanation Performance

Pyrolyzed Waste Stream and Biochar Performance Evaluation in Food Waste Anaerobic Digestion

Life Cycle Assessment of the Environmental Impacts and Energy Efficiency of an Integration of Sludge Anaerobic Digestion and Pyrolysis

Plastic-containing food waste conversion to biomethane, syngas, and biochar via anaerobic digestion and gasification: Focusing on reactor performance, microbial community analysis, and energy balance assessment

Biowaste management by hydrothermal carbonization and anaerobic co-digestion: Synergistic effects and comparative metagenomic analysis

Novel Strategy for Efficient Energy Recovery and Pollutant Control from Sewage Sludge and Food Waste Treatment.

Energy recovery from syngas and pyrolysis wastewaters with anaerobic mixed cultures

Dynamic Simulation and Thermoeconomic Analysis of a Novel Hybrid Solar System for Biomethane Production by the Organic Fraction of Municipal Wastes

Life Cycle Assessment of Pyrolysis, Gasification and Incineration Waste-to-energy Technologies: Theoretical Analysis and Case Study of Commercial Plants.

Performance Assessment and Metagenomic Analysis of Full-Scale Innovative Two-Stage Anaerobic Digestion Biogas Plant for Food Wastes Treatment

Kinetic Modeling of Co-Pyrogasification in Municipal Solid Waste (MSW) Management: Towards Sustainable Resource Recovery and Energy Generation

A Dynamic Analysis of Biomethane Reforming for a Solid Oxide Fuel Cell Operating in a Power-to-Heat System Integrated into a Renewable Energy Community

Environmental sustainability assessment of a new food waste anaerobic digestion and pyrolysis hybridization system

Processes simulation and environmental evaluation of biofuel production via Co-pyrolysis of tropical agricultural waste

Thermodynamic and economic evaluation of a novel waste-to-energy design incorporating anaerobic digestion and incineration

Thermally enhanced solid–liquid separation process in food waste biorefinery: modelling the anaerobic digestion of solid residues

Environmental Assessment of a Waste-to-Energy Cascading System Integrating Forestry Residue Pyrolysis and Poultry Litter Anaerobic Digestion

Anaerobic Co-Digestion of Food Waste with Sewage Sludge: Simulation and Optimization for Maximum Biogas Production

Comprehensive Evaluation of Gradient Controlled Anaerobic Digestion and Pyrolysis Integration Processes: A Case Study of Sargassum Treatment.