Abstract:An experimental and computational investigation directed at understanding the role of buoyancy-driven convection during constrained melting of phase change materials (PCM) inside a spherical capsule is reported. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. A Darcy’s Law-type porous media treatment links the effect of phase change on convection. Paraffin wax n-octadecane was constrained during melting inside a transparent glass sphere through the use of thermocouples installed inside the sphere. The melting phase front and melting fraction of the PCM are analyzed and compared with numerical solution obtained from the CFD code Fluent. Following a short period of symmetric melting due to prominence of diffusion, expedited phase change in the top region of the sphere and a wavy surface at the bottom of the PCM are observed. The computational predictions point to the strong thermal stratification in the upper half of the sphere that results from rising of the molten liquid along the inner surface of the sphere thus displacing the colder fluid. The waviness and excessive melting of the bottom of the PCM is shown to be underestimated by the experimental observation. This discrepancy is linked to the use of a support structure to hold the sphere. Measured temperature data and computational results near the bottom indicate the establishment of an unstable fluid layer that promotes chaotic fluctuations and is responsible for waviness of the bottom of the PCM. On the other hand, the comparison between the measured and computed temperatures in the top half of the sphere show the stable nature of the molten liquid layer. The computational results start to deviate from the thermocouple readings as one moves lower from the top of the sphere. This delay in predicting the melting instant is linked to the thermal stratification within the “constant temperature bath” that encloses the capsule.

Direct Numerical Simulation on Melting Phase Change Behavior in Open-cell Metal Foam

Local Thermal Nonequilibrium During Melting of a Paraffin Filled in an Open-Cell Copper Foam: A Visualized Study at the Pore-Scale

Melting of A Phase Change Material Filled in A Metal Foam: A Visualized Study at the Pore-Scale Using Infrared Imaging

Experimental and Numerical Studies on Melting Process of Phase Change Materials (pcms) Embedded in Open-Cells Metal Foams

Experimental and Numerical Study on Melting of Phase Change Materials in Metal Foams at Pore Scale

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

Study on the Melting Process of Phase Change Materials in Metal Foams Using Lattice Boltzmann Method

Enhanced Thermal Management with Microencapsulated Phase Change Material Particles Infiltrated in Cellular Metal Foam

Melting of Phase Change Materials Inside Metal Foams with Uniform/graded Porosity: Pore-scale Simulation

Lattice Boltzmann Simulation of Melting of Phase Change Materials in Metal Foams at Pore Scale

Microencapsulated Phase Change Material (MEPCM) Saturated in Metal Foam As an Efficient Hybrid PCM for Passive Thermal Management: A Numerical and Experimental Study

Melting of Phase Change Materials with Volume Change in Metal Foams

Experimental Study on Heat Transfer During Melting in Metal and Carbon Foam Saturated with Phase-Change Materials for Temperature Control in Electronic Devices

Modeling Metal Foam Enhanced Phase Change Heat Transfer in Thermal Energy Storage by Using Phase Field Method

A New Strategy for Enhanced Latent Heat Energy Storage with Microencapsulated Phase Change Material Saturated in Metal Foam

Effect of Natural Convection on Charging of Phase Change Materials in Graded Metal Foam: Pore-scale Simulation

Melting characteristics of phase change material inside graded aluminum foam based on tetrakaidecahedron model: Pore-scale simulations

Thermal Transport in Phase Change Materials Embedded in Metal Foam: Evaluation on Inclination Configuration

Experimental investigation on the melting behavior of phase change materials in open-cell metal foams in an inclined rectangular enclosure

Pore-scale study on Rayleigh-Bénard convection formed in the melting process of metal foam composite phase change material

Influence of pore density on melting of phase change materials in metal foams-numerical simulation with Lattice Boltzmann method