Abstract:The article proposes three lumped-distributed resonators, each of which introduces two transmission zeros (TZ) at real frequencies into the transfer function of inline bandpass filter (BPF). The use of such resonators in mixed-coupled BPFs without cross-coupling increases the number of TZs from ( $N + 1$ ) to (3 $N + 1$ ). It improves the filter performance. Lumped-distributed resonators represent a stepped-impedance or uniform transmission line segment to which one capacitance or inductance is connected in cascade. These resonators have two antiresonant frequencies $\omega _{p1}$ , $\omega _{p2}$ , which are placed next to the main resonant frequency $\omega _{0}$ , which leads to two TZs. Antiresonant frequencies $\omega _{p1}$ , $\omega _{p2}$ are the poles of the input admittance $Y(j\omega )$ , their position is controlled by the parameters of the resonators. Lumped-distributed resonators can form equidistant TZ pairs, including those of higher degree, allowing the implementation of BPFs with quasielliptic frequency responses and improved selectivity. It has been established that reducing Q-factors of inductor $Q_{L}$ and capacitor $Q_{C}$ do not increase the insertion loss in the passband of BPF. A design method for BPF with mixed couplings between adjacent resonators is established. It is also suitable for filters that use the proposed resonators. As result, the TZ number of such BPFs is increased from ( $N$ $+$ 1) to (3 $N + 1$ ).

Miniaturized Two-Pole Lumped BPF with Four Controllable TZs Using Multiple Coupling Paths

Lumped-Distributed Resonators Providing Multiple Transmission Zeros in Bandpass Filters With Simple and Mixed Couplings

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Miniaturized Tri-Band Bandpass Filter Design Using Quarter-Wavelength Shunted-Line Stepped-Impedance Resonators (slsirs) with Multi-Transmission Zeros

Study Of Dual-Band Inline Mixed Coupled Bpf Design And Two Transmission Zero Pairs Controlling Mechanism

Compact, Multilayer 5G Filter Based on Extracted-Pole Shielded Lumped Resonators

Compact Octa-band Bandpass Filter Based on Controllable Transmission Zeros with Wide Upper Stopband

Design of Miniaturized and Highly Selective On-Chip BPFs with Mixed-Coupled Resonators

Compact Multiband Bandpass Filter Using Low-Pass Filter Combined with Open Stub-Loaded Shorted Stub

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Bandpass Filter Using Three Pairs of Coupled Lines with Multiple Transmission Zeros

Compact Quad-Band Bandpass Filter Based on Sextuple-Mode Stepped Impedance Stub-Loaded Resonator

Miniaturized Dual-Band Bandpass Filter with Multiple Transmission Zeros

Transmission Zero Controllable Bandpass Filters with Dual and Quad-Band

Design of High-Temperature Superconducting Dual-Band Filter with Multiple Transmission Zeros

Novel compact band-pass filter with three transmission zeros

Compact Dual-Band Bandpass Filter and Diplexer Using Hybrid Resonant Structure with Independently Controllable Dual Passbands

Compact Dual‐band Bandpass Filter Using Coupled Lines and Shorted Stubs

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

High-Selectivity Wideband Bandpass Filter Using Simple Coupled Lines with Multiple Transmission Poles and Zeros

Miniaturized IPD bandpass filter with controllable transmission zero based on modified lumped T‐section