Abstract:Mg–6.0 Zn–2.0 Yb–0.5 Zr (wt.%) alloy exhibits excellent strength and ductility synergy after thermomechanical and heat treatment. Unfortunately, the hot workability and microstructure evolution under specific deformation regimes remain uncertain to date. In this work, the constitutive model and hot processing maps were established based on a series of isothermal compression tests. A detailed examination of deformation microstructures at different processing regimes revealed that the hot workability and correlated microstructure development were deformation condition dependent. When compressed at lower strain rates and higher deformation temperatures, the softening was promoted by dynamic recrystallization (DRX) and the prevalence of discontinuous dynamic recrystallization (DDRX) generally resulted in a complete DRX process with coarse grains and much-intensified texture. On the contrary, work hardening was improved with increasing dislocation density, and the continuous DRX (CDRX) may control the partial DRX progress, often presenting a much-refined microstructure with a more dispersed texture. Interestingly, a low strain rate of 0.001 s −1 and a moderate deformation temperature of 300 °C effectively balanced the nucleation rate and grain growth to finally achieve a much refined and relatively homogeneous grain structure. Further investigation concerning the activation energy suggested that the workability improved with increasing strain rate and temperature. Enhanced hot workability at most deformation regimes was achieved due to a lower average activation energy Q value in comparison with that of 1.0 wt.% Yb alloyed ZK60 counterpart, which was likely due to a higher activity of non-basal slips achieved in this alloy.

Study on the Effect of Solution Treatment on Hot Deformation Behavior and Workability of Mg-7Gd-5Y-0.6Zn-0.8Zr Magnesium Alloy

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Hot Deformation and Processing Map of As-Homogenized Mg–9Gd–3Y–2Zn–0.5Zr Alloy

Deformation Behavior, Microstructure Evolution and Hot Workability of Mg-3.7Gd-2.9Y-0.7Zn-0.7Zr Alloy

Effects of Heat Treatments on Hot Deformation Behaviors of the Mg-8Gd-3Sm-0.5Zr Alloy

Influence of Heat Treatment on the Evolution of Microstructure and Mechanical Properties of Mg-7Gd-5Y-0.6Zn-0.8Zr Magnesium Alloy

Effect of Solution Treatment on Microstructures and Hardness of Mg-Gd-Y-Zr Alloy

Effect of Deformation Parameters on Recrystallization Behavior and Long-Period Stacking-Ordered Phase of Mg-9Gd-4Y-2Zn-0.5Zr Alloy

Effect of Solid Solution Treatment on Microstructure and Mechanical Properties of Mg 97 Y 2 Zn 1 Alloy

Hot Compression Deformation Behavior of Mg-9Gd-2.9Y-1.9Zn-0.4Zr-0.2Ca (wt%) Alloy

Construction of Dynamic Recrystallization Critical Strain Model, Kinetic Model, and Hot Workability of Mg–8Gd–4Sm–1Zn–0.5Zr Alloy

Hot workability and microstructure of Mg–6.0 Zn–2.0 Yb–0.5 Zr magnesium alloy

Characterization of Hot Deformation Behavior and Processing Maps of Mg-3Sn-2Al-1Zn-5Li Magnesium Alloy

Effect of Solid Solution and Aging Treatments on the Microstructures Evolution and Mechanical Properties of Mg–14Gd–3Y–1.8Zn–0.5Zr Alloy

Effect Of Solution Treatment And Extrusion On The Microstructure And Mechanical Properties Of A Mg-2gd-Nd-0.4zn-0.3zr Alloy

Hot Deformation Behavior, Processing Maps and Microstructural Evolution of the Mg-2.5Nd-0.5Zn-0.5Zr Alloy

Hot Deformation Behavior and Processing Map of Coarse-Grained Mg–Gd–Y–Nd–Zr Alloy

Effect of heat treatment on microstructure and mechanical properties of Mg-12Gd-Y-0.5Zr alloy cast by metal mould

Hot deformation behavior of Mg-7Gd-2.5Nd-0.5Zr heat-resistant magnesium alloy

Effects of Heat Treatments on Microstructure and Mechanical Properties of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) Alloy

Effect of Heat Treatment on Microstructure and Mechanic Properties of Gravity Casting Mg-5.8Sm-0.4Zn-0.3Zr Magnesium Alloy