Abstract:ABSTRACT The focus of this paper is on the modelling of miniature electromechanical actuators used in a morphing wing application, on the development of a control concept for these actuators, and on the experimental validation of the designed control system integrated in the morphing wing-tip model for a real aircraft. The assembled actuator includes as its main component a brushless direct current motor coupled to a trapezoidal screw by using a gearing system. A Linear Variable Differential Transformer (LVDT) is attached on each actuator giving back the actuator position in millimetres for the control system, while an encoder placed inside the motor provides the position of the motor shaft. Two actuation lines, each with two actuators, are integrated inside the wing model to change its shape. For the experimental model, a full-scaled portion of an aircraft wing tip is used with the chord length of 1.5 meters and equipped on the upper surface with a flexible skin made of composite fibre materials. A controllable voltage provided by a power amplifier is used to drive the actuator system. In this way, three control loops are designed and implemented, one to control the torque and the other two to control the position in a parallel architecture. The parallel position control loops use feedback signals from different sources. For the first position control loop, the feedback signal is provided by the integrated encoder, while for the second one, the feedback signal comes from the LVDT. For the experimental model, the parameters for the torque control, but also for the position control-based encoder signal, are implemented in the power amplifier energising the electrical motor. On the other hand, a National Instruments real-time system is used to implement and test the position control-based LVDT signal. The experimental validation of the developed control system is realised in two independent steps: bench testing with no airflow and wind-tunnel testing. The pressure data provided by a number of Kulite sensors equipping the flexible skin upper surface and the infrared thermography camera visualisations are used to estimate the laminar-to-turbulent transition point position.

Dynamic shape control of piezocomposite-actuated morphing wings with vibration suppression

High Actuation Capability and Smooth-Deformation Piezo Morphing Wing Based on Multi-Layer Parallel Pre-Compressed MFC Bimorph

Active compound shape/vibration control of piezo-actuated variable camber wing section via hybrid feedback/feedforward control scheme

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

Experimental study of axial-compressed macro-fiber composite bimorph with multi-layer parallel actuators for large deformation actuation

Axial-Pressure-Adjustable Macro-Fiber Composite Bimorph Actuator Based on Twisted and Coiled Polymer Actuator

Induced-Strain Actuators for Morphing of Multi-Element Airfoils

Control Force Enhancement Of Conical Shells Using Piezoelectric Macro-Fiber Composite

Bending/Torsion Control of Wing Panels With Diagonal X-Actuators

Aeroelastic model and analysis of an active camber morphing wing

A New X-Actuator Design for Controlling Wing Bending and Twisting Modes

Autonomous Material Composite Morphing Wing

Control of Static Shape, Dynamic Oscillation, and Thermally Induced Vibration of Nozzles

A new hybrid control methodology for a morphing aircraft wing-tip actuation mechanism

Koopman-based model predictive control with morphing surface: Regulating the flutter response of a foil with an active flap

A NEW X-ACTUATOR DESIGN FOR DUAL BENDING/TWISTING CONTROL OF WINGS

The optimization of the actuator and sensor layout for piezoelectric smart blades

Parametric active aeroelastic control of a morphing wing using the receptance method

Aeroelastic Response of a Z-Shaped Folding Wing During the Morphing Process

Design, kinematic and fluid-structure interaction analysis of a morphing wing

Morphing Aircraft and Its Morph-driving Techniques