Abstract:Characteristics of vector beams in mid-infrared waveband are analyzed numerically in an As2Se3 photonic crystal fiber (PCF) with small central hollow core (SCHH), including the mode fields, confinement loss, effective refractive index and chromatic dispersion. In the PCFs with the SCHH diameter d(0) of 0-1.5 mu m, the confinement losses of the four vector beams (HE11, TM01, TE01, and HE21) are smaller than 1.0 dB/m for the wavelengths up to similar to 5 mu m. For the SCHH diameter d0 of 0.5-1.5 mu m, the field enhancement of the HE11 mode occurs in the SCHHs in the central area for the wavelengths >= 5 mu m. This happens because the evanescent light penetrates into the SCHH. With d(0) increasing, the effective refractive index separations (delta(neff)) between the HE11 mode and high-order modes (TM01, TE01, and HE21) decreases, while the d neff among the high-order modes increases. At the wavelength of 5 mu m, the delta(neff) of HE11-TE01, TE01-HE21, and HE21-TM01 is 0.03098, 0.03960, and 0.06867, respectively, when d(0) is 1.5 mu m. The second ZDWs of TE01, HE21 and TM01 mode are blueshifted with the increase of d(0), but they are longer than 5 mu m. The negative dispersion regions of the high-order modes (TE01, HE21, and TM01) are much wider than the HE11 modes. With the increase of d(0), the HE11 mode dispersion curves have no obvious change, while the high-order modes (TE01, HE21, and TM01) dispersion curves become steep at the longer wavelength, the TM01 mode changes most obviously, and the depression appears. The transmission property for the waveband of 5-10 mu m could be improved by increasing the ring number or core diameter of the fiber. The fiber losses at 10 mu m are 4.81, 7.65, 5.95 and 2.47 dB/m for the four kinds of vector beams, respectively, when the diameters of the central area and SCHH are increased to 15.09 and 5.25 mu m. Our simulated results will be useful for the optical applications in mid-infrared waveband, such as the generation of cylindrical vector mode and orbital angular momentum (OAM) and the particle manipulation by optical fields.

Crystalline Selenium Core Optical Fibers with Low Optical Loss

Lasing of CdSe/SiO2 Nanocables Synthesized by the Facile Chemical Vapor Deposition Method.

An optical fiber glass containing PbSe quantum dots

Fabrication of mid-IR As-Se chalcogenide glass and fiber with low scattering loss

Mid-infrared dual-cladding photonic crystal fiber with high birefringence and high nonlinearity

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Low-loss Ge-As-Se-Te Fiber for High-Intensity CO2 Laser Delivery

Mid-infrared single-Mode As-S-Se glass fiber and its supercontinuum generation

Core-clad Pr(3+)-doped Ga(In)-Ge-As-Se-(I) glass fibers: Preparation, investigation, simulation of laser characteristics

Multifunctional Cu-Se Alloy Core Fibers and Micro–Nano Tapers

Magnetron-sputtered and Thermal-Evaporated Low-Loss Sb-Se Phase-Change Films in Non-Volatile Integrated Photonics

Effect of Annealing Conditions on the Physio-Chemical Properties of Spin-Coated As2se3 Chalcogenide Glass Films

Development of As-Se tapered suspended-core fibers for ultra-broadband mid-IR

1.2-15.2 μm supercontinuum generation in a low-loss chalcohalide fiber pumped at a deep anomalous-dispersion region

Laser recrystallization and inscription of compositional microstructures in crystalline SiGe-core fibres

Se-H-free As2Se3 fiber and its spectral applications in the mid-infrared

Post-processing ZnSe optical fibers with a micro-chemical vapor transport technique

Preparation of especially pure Ge-Se glasses via germanium monoselenide for Mid-IR fiber optics

Low-loss chalcogenide microstructured optical fibers prepared by eliminating interfaces defects

Ultra-high birefringence mid-infrared Ge20Sb15Se65 chalcogenide glass photonic crystal fiber with low confinement loss

Characteristics of Vector Beams in Mid-Infrared Waveband in an As2Se3 Photonic Crystal Fiber with Small Hollow Core