Abstract:Two series of glasses compositions, xGeSe 2 -(100-x) As 2 Se 3 (x = 15,42,63,79,94 mol%) and Ge 30 As y Se 70-y (y = 4,10,15,20 mol%), were selected for optimization with a high Brillouin gain coefficient(g B ) by considering both the acousto-optic parameters and the stability of glass against crystallization. The variation in its thermal, mechanical, and material acousto-optic properties were systematically investigated. In the xGeSe 2 -(100-x) As 2 Se 3 series of glasses, the gradual increase of GeSe 2 , resulted in a significant increase in elastic modulus and longitudinal sound velocity (V L ), whereas refractive index(n) and acoustic attenuation(α) decreased rapidly. The decrease in n, and the increase in V L were not conducive to the calculation of the g B . Furthermore, in the Ge 30 As y Se 70-y series of glasses, n increased to a maximum of 2.62, and α decreased to a minimum of 215 dB/cm/GHz 2 , with increasing As content. The highest g B = 33.77 × 10 −11 m/W was obtained in Ge 30 As 20 Se 50 at 1550 nm, and this value was ∼2.3 times greater than that obtained in As 2 S 3 (g B = 14.43 × 10 −11 m/W) and ∼1.6 times greater than that obtained in As 2 Se 3 (g B = 20.89 × 10 −11 m/W) chalcogenide (ChG) glass. On the basis of Ge 30 As 20 Se 50 host glass, a chalcogenide single-refractive-index fiber was drawn with a lowest optical loss of 0.7 dB/m at 6.5 μm. The above results provided an important reference for the further development of new chalcogenide glass fiber with high g B , and broadened the application in Brillouin lasers.

Core-clad Pr(3+)-doped Ga(In)-Ge-As-Se-(I) glass fibers: Preparation, investigation, simulation of laser characteristics

Photo-Writable Sulfide Glasses Used to Fabricate Core-Clad Fiber Doped with Pr$^{3+}$ for Mid-IR Luminescence

Mid-infrared dual-cladding photonic crystal fiber with high birefringence and high nonlinearity

Nonlinear Ge-As-Se chalcogenide fibers

Mid-infrared Supercontinuum Generation in Chalcogenide Fibers with High Laser Damage Threshold.

Spectroscopic properties of Er3+-doped chalco-halide glass ceramics

Low-loss Ge-As-Se-Te Fiber for High-Intensity CO2 Laser Delivery

Intense 2.7 μm emission of Er3+/Pr3+ doped Ga5Ge20Sb10S65 chalcogenide glass

Novel Ge-As-Se chalcogenide glass for potential high Brillouin gain coefficient of fiber

Crystalline Selenium Core Optical Fibers with Low Optical Loss

Fabrication of mid-IR As-Se chalcogenide glass and fiber with low scattering loss

Optical Properties and Local Structure of Dy3+-doped Chalcogenide and Chalcohalide Glasses

Dy 3+ -doped chalcohalide glass for 1.3-μm optical fiber amplifiers

5?μm CW Ce^3+-doped chalcogenide glass fiber laser with 17% slope efficiency

Reactive molten core fabrication of glass-clad Se 0.8 Te 0.2 semiconductor core optical fibers

Purification and single crystallization of glass‐cladding GaSb core fiber using 532 nm laser‐driven thermal gradients

Reactive Molten Core Fabrication Of Glass-Clad Se0.8te0.2 Semiconductor Core Optical Fibers

Mid-infrared emissions of Dy3+ doped Ga-As-S chalcogenide glasses and fibers and their potential for a 42 μm fiber laser

Progress in rare-earth-doped mid-infrared fiber lasers

Effect of biphasic-phase on the mid-infrared emission properties of Pr3+ doped GeSe2-Ga2Se3 chalcogenide glass ceramics

Precisely controllable fabrication of Er3+-doped glass ceramic fibers: novel mid-infrared fiber laser materials