Measurements of Polarization Crosstalk in a Polarization-Maintaining Few-Mode Optical Fiber

Zhen Wang,Xiaolong Hu,Muyang Lin,Qi Mo,He Wen,Guifang Li

DOI: https://doi.org/10.1364/cleo_at.2017.jw2a.70

2017-01-01

Abstract:We experimentally demonstrate the measurements of the intra- and inter-spatial-modal polarization crosstalk in a polarization-maintaining few-mode optical fiber using optical time-domain reflectometry.

What problem does this paper attempt to address?

Crosstalk in Two Intersecting Optical Microfibers

Weijia Li,Yixiao Gao,Limin Tong

DOI: https://doi.org/10.1109/lpt.2019.2936053

IF: 2.6

2019-01-01

IEEE Photonics Technology Letters

Abstract:Structural hybridization and size miniaturization of integrated photonic devices are among the hotspots of photonics research field. The crosstalk between densely arranged subwavelength-width optical waveguides such as optical microfibers has become an important issue. Here we investigate a common case of crosstalk in two intersecting subwavelength-diameter optical microfibers at 1550-nm wavelength by numerical simulations and experiments, and obtain the dependence of coupling efficiency and crosstalk on modal polarizations, intersection angle, fiber diameter and separation of the two fibers, respectively. The simulation results show that, the crosstalk decreases with increasing intersection angle and separation between the two microfibers. Especially, for single-mode microfibers, the crosstalk is lower than 1% (i. e., better than -20 dB) when the intersection angle is larger than 60 similar to, and can be minimized to less than 0.05% (i. e., better than -33 dB) for perpendicular intersection (i. e., intersection angle of 90 degrees). However, the dependence of crosstalk on fiber diameter is not monotonous, typically, from the single-mode cutoff diameter, the crosstalk increases with decreasing diameter until reaching a maximum, and decreasing afterward. To verify the simulation, we have experimentally measured the angle-dependent crosstalk between contacting microfibers with typical diameters. With increasing intersection angle, the crosstalk drastically decreases to a negligible value (less than -41 dB for vertically intersecting microfibers), which is consistent with the simulation results. Our results offer a valuable reference or guideline for designing compact optical interconnection and integration with optical microfibers or other subwavelength-width waveguides alike.
Research on Polarization Parameters Testing System

caihong mao,xiaowu shu,chen liu,xudong mou,guoguang yang

DOI: https://doi.org/10.1117/12.471668

2002-01-01

Abstract:Polarization controlling is crucial to increase the accuracy of the fiber-optic gyroscopes. In this paper, a new method and testing device measuring the polarization characteristics of the optical components such as SLD light source, polarize maintain fiber, coupler and polarizer was introduced. This system has good qualities of low cost, easy to operate, high accuracy. Extinction ratio of fiber components can be tested up to 55dB. Tested with that device, Panda PM fiber's extinction ratio is 25dB.
Measurement of Polarization Mode Couplings in Polarization-Maintaining Fibers Based on White Light Interference

HF Li,G Zhou,WC Jing,XM Man,YM Zhang

DOI: https://doi.org/10.1117/12.482026

2002-01-01

Abstract:In this paper, a novel method to measure the distributed polarization mode coupling in polarization-maintaining (PM) fibers is introduced. The measurement system is based on white light interference. A super luminescent diode is used as the broadband light source in the system. The whole test system is working on 1300nm wavelength. There are two main parts of the measurement equipment: polarization adjustment and a scanned Michelson interferometer. In order to improve the accuracy, a piezoelectric transducer (PZT) is-applied in the scanned Michelson interferometer. The maximum length of tested polarization-maintaining fiber is one kilometer, and the spatial resolution of this method reached 60 mm along the tested PM fiber. The degree of polarization mode coupling that could be detected is -75dB.
Measurement of the intermodal crosstalk of a bent multimode waveguide.

Jian Wang,Changyun Zhao,Bing Wei,Wang Gencheng,Tingge Dai,Yuehai Wang,Xiaoqing Jiang,Yubo Li,Jianyi Yang

DOI: https://doi.org/10.1364/AO.55.007619

IF: 1.9

2016-01-01

Applied Optics

Abstract:We quantitatively investigate the main source of the intermodal crosstalk of a silicon-based bent multimode waveguide by experiment. The measurement is performed through time-domain scanning low-coherence interferometry. From the measurement results, one can not only calculate the modal crosstalk, but can also locate the position where the crosstalk appears. The results indicate that the modal mismatch at the points where the curvature of the waveguide changes is the main origin of the modal crosstalk. For a two-mode waveguide with a bending radius of 5 mu m at 1310 nm, the crosstalk is as high as -20 and -16 dB for the fundamental and first-order mode, respectively. This work gives us a deep insight into how the guided modes actually propagate through the bent waveguide. (C) 2016 Optical Society of America
Investigation of Spontaneous Raman Scattering in Few-Mode Fibers: Dependence on Polarization and Spatial Modes

Zhenzhen Zhang,Hongtao Cheng,Cheng Guo,Liang Cui,Yichi Zhang,Qi Mo,Huang Yu,Michael Vasilyev,Xiaoying Li

DOI: https://doi.org/10.1109/jlt.2021.3096230

IF: 4.7

2021-10-01

Journal of Lightwave Technology

Abstract:Zhenzhen Zhang, Hongtao Cheng, Cheng Guo, Liang Cui, Yichi Zhang, Qi Mo, Huang Yu, Michael Vasilyev, Xiaoying LiWe study Raman gain in few-mode fibers (FMFs) by measuring spontaneous Raman scattering in polarization-maintaining FMF, mode-maintaining ... [J. Lightwave Technol. 39, 6281-6287 (2021)]

engineering, electrical & electronic,optics,telecommunications
Interferometric measurement of polarization mode distribution in fiber

Tao Wang,Kejiang Zhong,Wei Ye,Guoguang Yang

1997-01-01

Abstract:A high accuracy method for measuring polarization mode distribution in single-mode fiber was designed, which conquered the weakness of classic method for measuring the fiber and fiber component. This system, using short coherent-length such as SLD, is of the accuracy of couple intensity up to -80dB and resolution of survey distance is 10mm. A result of Lyot fiber-depolarizer is given.
Nondestructive Measurement Of Polarization Characteristics Of Fiber-Pigtailed Waveguide-Type Ring Resonators

Yi Lin,Hanzhao Li,Jianjie Zhang,Huilian Ma,Zhonghe Jin

DOI: https://doi.org/10.1109/acp.2018.8596071

2018-01-01

Abstract:The polarization analysis model of the waveguide-type ring resonator (WRR) is built and four misaligned angles can be obtained without destruction. The polarization extinction ratio improvement of the lightwave out from the WRR is analyzed.
Mitigation of Polarization-Induced Fading in Optical Vector Network Analyzer for the Characterization of km-scale Space-Division Multiplexing Fibers

Besma Kalla,Martina Cappelletti,Menno van den Hout,Vincent van Vliet,Simon Rommel,Luca Palmieri,Thomas Bradley,Chigo Okonkwo

2024-10-10

Abstract:We propose an optimized optical vector network analyzer with automatic polarization control to stabilize the reference arm polarization throughout the sweep range. We demonstrate this technique, successfully removing the polarization-induced fading and measurement distortions in insertion loss by characterizing a 10 km multi-core fiber.

Signal Processing
Experimental Analysis on Variations and Accuracy of Crosstalk in Trench-Assisted Multi-core Fibers

Hui Yuan,Alessandro Ottino,Yunnuo Xu,Arsalan Saljoghei,Tetsuya Hayashi,Tetsuya Nakanishi,Eric Sillekens,Lidia Galdino,Polina Bayvel,Zhixin Liu,Georgios Zervas

DOI: https://doi.org/10.48550/arXiv.2008.08034

2020-08-07

Abstract:Space division multiplexing using multi-core fiber (MCF) is a promising solution to cope with the capacity crunch in standard single-mode fiber based optical communication systems. Nevertheless, the achievable capacity of MCF is limited by inter-core crosstalk (IC-XT). Many existing researches treat IC-XT as a static interference, however, recent research shows that IC-XT varies with time, wavelength and baud rate. This inherent stochastic feature requires a comprehensive characterization of the behaviour of MCF to its application in practical transmission systems and the theoretical understanding of IC-XT phenomenon. In this paper, we experimentally investigate the IC-XT behaviour of an 8-core trench-assisted MCF in a temperature-controlled environment, using popular modulation formats. We compare the measured results with the theoretical prediction to validate the analytical IC-XT models previously developed. Moreover, we explore the effects of the measurement configurations on the IC-XT accuracy and present an analysis on the IC-XT step distribution. Our results indicate that a number of transmission parameters have significant influence on the strength and volatility of IC-XT. Moreover, the averaging time of the power meter and the observation time window can affect the value of the observed IC-XT, the degrees of the effects vary with the type of the source signals.

Signal Processing
Polarization Maintain Fiber Couplers with Novel Transmission Characteristics

Xinyue Wang,Qin Wang,Changhong He,Jun Xie,Ziyu Wang

DOI: https://doi.org/10.1109/oecc.2015.7340135

2015-01-01

Scientia Forestalis

Abstract:we report theoretical and experimental investigations into a polarization maintain fiber (PMF) coupler with novel transmission characteristics. The experimental results show that for circular and elliptically polarized input light, the novel coupler will act as an in-line polarizer and as a conventional fused-taper PMF coupler, the output polarization extinction ratio (PER) of the transmission arm is 31dB at a wavelength of 845nm. For linearly polarized input light, the coupler will merely act as a conventional 3dB PMF coupler. This novel device can be widely used in optical sensor systems, such as fiber optical gyroscopes, fiber optical hydrophones, and fiber optical current sensors, etc.
Measurement of A Polarization Cross-Saturation Coefficient in Two-Mode Nd:Yag Lasers by Polarized Optical Feedback

Yidong Tan,Shulian Zhang,Cheng Ren,Zhou Ren

DOI: https://doi.org/10.1088/0953-4075/42/2/025401

2009-01-01

Abstract:We demonstrate experimentally that both the intensities of the two modes in Nd:YAG lasers are modulated reversely with unequal depths, which relates to the cross-saturation effect between these two laser fields, when the laser is subjected to polarized optical feedback (POF). We show that, remarkably, the results can be interpreted by a multimode rate equation model considering the coupling between two laser fields and the external optical feedback. An original and simple method of measuring the polarization cross-saturation coefficient is performed based on POF. This method is applicable to most kinds of lasers. Moreover, polarization switching is observed under higher optical feedback. Our numerical results are in very good agreement with the experiments.
Numerical Analysis of Dual-Core Optical Fiber Crosstalk Via Supermode Theory

Gaozhu Peng,Jia Zhang,Ming-Jun Li

DOI: https://doi.org/10.1364/acpc.2013.af2d.25

2013-01-01

Abstract:Numerical analysis of crosstalk for dual-core optical fibers is performed via the supermode theory. The method is compared with the coupled mode theory. Core distance, index difference, and bending effects are studied.
In-service Crosstalk Monitoring, Tracing and Lightpath Re-Optimization for Space-Division Multiplexing Optical Networks

Ruijie Luo,Nan Hua,Yufang Yu,Yongtai Jin,Xiaoping Zheng,Bingkun Zhou

DOI: https://doi.org/10.1364/oe.25.030428

IF: 3.8

2017-01-01

Optics Express

Abstract:In recent years, to enlarge the single-mode fibers (SMFs) transmission capacity, researchers focused on the dimension of space, which is a new degree of freedom that is being considered for optical fiber communication beyond WDM. Space-division multiplexing (SDM), including mode-division multiplexing (MDM) using multimode fibers (MMFs) or few-mode fibers (FMFs), and core multiplexing using multicore fibers (MCFs), has attracted much recent attention. In an SDM system, high-density spatial channels are tightly packed into a single fiber, thus making crosstalk among cores or modes a critical challenge due to fiber imperfections, bending, and twisting. Previous studies have mostly been confined to the routing algorithms for crosstalk reduction but few focuses on the in-service crosstalk monitoring, tracing and quality-of-transmission (QoT)-oriented lightpath re-optimization. In this paper, we proposed novel in-service crosstalk monitoring and tracing (CMT) method and algorithm using fine-grained optical time slice monitoring channels for crosstalk reduction in SDM optical networks. Benefitting from the large amount of fine-grained channels provided by optical time slices, it becomes possible for every source node to allocate a dedicated monitoring time slice carrying the traffic and path information for each connection. Crosstalk monitoring and tracing can be realized by extracting the information contained in these monitoring time slices. Simulation results shows that the proposed CMT method and algorithm can obtain acceptable performance in large-scale network scenarios. Furthermore, we also proposed a quality-of-transmission (QoT)-oriented lightpath re-optimization mechanism based on in-service crosstalk monitoring and tracing to maintain a high level of QoT. Finally, we designed a prototype experiment to validate our proposed in-service crosstalk monitoring method. Results show that this method can realize in-service crosstalk monitoring, tracing and lightpath re-optimization over a seven-core fiber based transmission system, and the crosstalk with a minimum value of -37.9 dB can be monitored and successfully traced.
Accurate Mode-Coupling Characterization of Low-Crosstalk Ring-Core Fibers Using Integral Calculation Based Swept-Wavelength Interferometry Measurement

Junwei Zhang,Jiangbo Zhu,Junyi Liu,Shuqi Mo,Jingxing Zhang,Zhenrui Lin,Lei Shen,Lei Zhang,Jie Luo,Jie Liu,Siyuan Yu

DOI: https://doi.org/10.1109/jlt.2021.3101674

IF: 4.7

2021-10-01

Journal of Lightwave Technology

Abstract:In this paper, to accurately characterize the low inter-mode coupling of the weakly-coupled few mode fibers (FMFs), we propose a modified inter-mode coupling characterization method based on swept-wavelength interferometry measurement, in which an integral calculation approach is used to eliminate significant sources of error that may lead to underestimation of the power coupling coefficient. Using the proposed characterization method, a low-crosstalk ring-core fiber (RCF) with low mode dependent loss (MDL) and with single span length up to 100 km is experimentally measured to have low power coupling coefficients between high-order orbital angular momentum (OAM) mode groups of below 30 dBkm over C band. The measured low coupling coefficients based on the proposed method are verified by the direct system power measurements, proving the feasibility and reliability of the proposed inter-mode coupling characterization method.

engineering, electrical & electronic,optics,telecommunications
Experimental study of intramodal XPM reduction by intramodal dispersion in weakly coupled FMF

Mingqing Zuo,Gang Qiao,Yu Yang,Chengbin Long,Dawei Ge,Dong Wang,Yunbo Li,Zhangyuan Chen,Dechao Zhang,Han Li,Juhao Li

DOI: https://doi.org/10.1364/ol.533610

IF: 3.6

2024-08-26

Optics Letters

Abstract:Mingqing Zuo, Gang Qiao, Yu Yang, Chengbin Long, Dawei Ge, Dong Wang, Yunbo Li, Zhangyuan Chen, Dechao Zhang, Han Li, Juhao Li The understanding of nonlinear propagation effects in low-crosstalk few-mode fiber is crucial for a weakly coupled mode-division ... [Opt. Lett. 49, 4887-4890 (2024)]

optics
Concentric circular stress region-assisted pseudo-elliptical-ring-core polarization-maintaining few-mode fiber

Yanan Liu,Xin Yan,Xueguang Yuan,Yang’an Zhang,Jinnan Zhang,Xia Zhang

DOI: https://doi.org/10.1016/j.optcom.2024.130785

IF: 2.4

2024-06-13

Optics Communications

Abstract:In this paper, a pseudo-elliptical-ring-core polarization-maintaining few-mode fiber structure assisted by concentric circular stress-applying region is proposed. Numerical simulation results show that the structure can stably support 14 transmission modes. By introducing two elliptical stress regions with low refractive index inside the core, and a circular stress region with concentric core between the fiber core and cladding, the effective refractive index difference between higher-order modes is significantly improved. In the C+L band, the minimum refractive index difference between adjacent modes is not less than 2 10 -4 . At 1550 nm, the effective refractive index difference between the two fundamental modes reaches 4.8 10 -4 . The mode dispersions are less than |-33| ps/nm/km, and the maximum bending loss is in the order of 10 -7 dB/m (bending radius ≥ 2.5 cm). This work may pave the way for the development of short-distance large-capacity optical fibers.

optics
Polarization-Resolved Transmission Matrices of Specialty Optical Fibers

Erin S. Lamb,Tristan Kremp,David J. DiGiovanni,Paul S. Westbrook

2024-06-01

Abstract:Transmission matrix measurements of multimode fibers are now routinely performed in numerous labs, enabling control of the electric field at the distal end of the fiber and paving the way for the potential application to ultrathin medical endoscopes with high resolution. However, the process of building an experimental setup and developing the supporting code to measure the fiber's transmission matrix remains challenging with full details on experimental design, data collection, and supporting algorithms spread over multiple papers or lacking in detail. Here, we outline a complete and self-contained description of the experiment we use to measure fully polarization-resolved transmission matrices. Our specific implementation of the full polarization experiment is new and is easy to align while providing flexibility to switch between full-polarization and scalar measurements if desired. We introduce a new method to measure and account for the phase and amplitude drift during the measurement using a Levenberg-Marquardt nonlinear fitting algorithm. Finally, we describe creating distal images through the multimode fiber using phase-to-amplitude shaping techniques to construct the correct input electric field and show that results are insensitive to this choice as quantified by measuring the contrast of a razor blade at the distal end of the fiber. Throughout the paper, we discuss applications of our setup and measurement process to a variety of specialty fibers, including fibers with harsh environment coatings, coreless fibers, rectangular core fibers, pedestal fibers, and a pump-signal combiner based on a tapered fiber bundle.

Optics
Inter-Core Crosstalk in Multicore Fibers: Impact on 56-Gbaud/λ/Core PAM-4 Transmission

Aleksejs Udalcovs,Rui Lin,Oskars Ozolins,Lin Gan,Lu Zhang,Xiaodan Pang,Richard Schatz,Anders Djupsjöbacka,Ming Tang,Songnian Fu,Deming Liu,Weijun Tong,Sergei Popov,Gunnar Jacobsen,Jiajia Chen

DOI: https://doi.org/10.48550/arXiv.1812.04709

2018-11-13

Abstract:We experimentally demonstrate the impact of inter-core crosstalk in multicore fibers on 56Gbaud PAM-4 signal quality after 2.5-km transmission over a weakly-coupled and uncoupled sevencore fibers, revealing the crosstalk dependence on carrier central wavelength in range of 1540-1560 nm.

Signal Processing
Polarization Control Techniques in the Brillouin Optical Time Domain Analyzer

BAO Chong,SONG Muping,YE Xianfeng

DOI: https://doi.org/10.3969/j.issn.1004-1699.2010.02.012

2010-01-01

Abstract:In the standard single-mode optical-fiber,the frequency shift of Brillouin scattering light are the functions of the temperature and strain.So,we can detect the temperature and strain of the optical-fiber by the Brillouin optical time domain analyzer.Because the stimulated Brillouin scattering in the optical-fiber is polarization related,the precision and the correctness of this system is then becoming worse.Here,we studied orthogonal polarization control and random polarization control to alleviate this optical-polarization-related problem.
Transmission Modes of Metal-Clad Polarization Maintaining Fiber Polarizers

Xinyue Wang,Wen Sun,Zhongwei Tan,Zhu Zhou,Ziyu Wang

DOI: https://doi.org/10.1109/acp.2018.8595952

2018-01-01

Abstract:We investigate the transmission modes of metal-clad polarization maintaining fiber polarizers theoretically and experimentally, and propose a new method to demonstrate the TE modes are preferentially transmitted by the metal-clad polarization maintaining fiber polarizers.

Measurements of Polarization Crosstalk in a Polarization-Maintaining Few-Mode Optical Fiber

Crosstalk in Two Intersecting Optical Microfibers

Research on Polarization Parameters Testing System

Measurement of Polarization Mode Couplings in Polarization-Maintaining Fibers Based on White Light Interference

Measurement of the intermodal crosstalk of a bent multimode waveguide.

Investigation of Spontaneous Raman Scattering in Few-Mode Fibers: Dependence on Polarization and Spatial Modes

Interferometric measurement of polarization mode distribution in fiber

Nondestructive Measurement Of Polarization Characteristics Of Fiber-Pigtailed Waveguide-Type Ring Resonators

Mitigation of Polarization-Induced Fading in Optical Vector Network Analyzer for the Characterization of km-scale Space-Division Multiplexing Fibers

Experimental Analysis on Variations and Accuracy of Crosstalk in Trench-Assisted Multi-core Fibers

Polarization Maintain Fiber Couplers with Novel Transmission Characteristics

Measurement of A Polarization Cross-Saturation Coefficient in Two-Mode Nd:Yag Lasers by Polarized Optical Feedback

Numerical Analysis of Dual-Core Optical Fiber Crosstalk Via Supermode Theory

In-service Crosstalk Monitoring, Tracing and Lightpath Re-Optimization for Space-Division Multiplexing Optical Networks

Accurate Mode-Coupling Characterization of Low-Crosstalk Ring-Core Fibers Using Integral Calculation Based Swept-Wavelength Interferometry Measurement

Experimental study of intramodal XPM reduction by intramodal dispersion in weakly coupled FMF

Concentric circular stress region-assisted pseudo-elliptical-ring-core polarization-maintaining few-mode fiber

Polarization-Resolved Transmission Matrices of Specialty Optical Fibers

Inter-Core Crosstalk in Multicore Fibers: Impact on 56-Gbaud/λ/Core PAM-4 Transmission

Polarization Control Techniques in the Brillouin Optical Time Domain Analyzer

Transmission Modes of Metal-Clad Polarization Maintaining Fiber Polarizers