Abstract:FePt nanoparticles with different morphologies were successfully prepared in the presence of surfactant sodium dodecyl benzene sulfonate(SDBS) with the addition of different molar ratio of surfactant SDBS to precursors of FePt(SDBS/FePt) by a soft-solution approach.XRD and TEM characterizations indicated that the as-synthesized particles possessed chemically disordered face centered cubic(FCC) structure.And the morphologies showed spherical,irregular schistose and dendritic structure respectively when changing the molar ratio of SDBS/FePt from 7∶ 1 to 9∶ 1 and 11∶ 1.VSM results indicated that the as-synthesized nanoparticles showed zero coercivity and possessed paramagnetic behavior at room temperature and transformed into ferromagnetic when annealed at 500 ℃ for 30 min under inert gas of Ar.When adjusted the molar ratio of SDBS/FePt from 7∶ 1 to 9∶ 1 and 11∶ 1,the coercivity was 4489,30429,18457 A · m-1 respectively,and the saturation magnetization Ms changed from 6.65,22.45 to 11.43 Am2 · kg-1.The magnetic energy product showed the largest at SDBS/FePt=9∶ 1.It could be inferred that the result of differences in nanoparticle morphology although the magnetic property of nanoparticles was the result of the comprehensive effect of nanoparticle size,morphology,component,crystallinity and structure.The morphology and magnetic properties of FePt nanoparticles were controlled by changing the content of surfactant and provided a new way to the morphology and magnetic properties control of FePt nanoparticles.

Morphology Control of Sr5(PO4)3F Nanoparticles Synthesized Through Co-Precipitation

Controllable Synthesis of Hierarchical Micro/nano Structured FePO4 Particles under Synergistic Effects of Ultrasound Irradiation and Impinging Stream

Influence of Different Preparation Methods on Crystallisation and Morphology of Fe2o3 Nanoparticles

Controllable Synthesis of (nh4)fe2(po4)2(oh)·2h2o Using Two-Step Route: Ultrasonic-intensified Impinging Stream Pre-Treatment Followed by Hydrothermal Treatment.

Morphology-Controlled Synthesis of Pbmoo4 Crystals by A Simple Sonochemical Method

Morphology and Phase Selective Synthesis of EuF3 Nanostructures by Polyelectrolyte Assisted Chemical Reaction and Their Optical Properties

Preparation and crystallization control of nanoparticle hydroxyapatite

Synthesis and Growth Mechanisms of Nanoscale SrSO_4 Powderswith Different Crystallographic Morphologies

Morphology Evolution and Impurity Analysis of LiFePO4 Nanoparticles Via a Solvothermal Synthesis Process

Morphological Control of FePt Nanoparticles by Induced Surfactant

Morphology and agglomeration control of LiMnPO$_4$ micro- and nanocrystals

Morphology Control in the Hydrothermal Synthesis of FeS Nanoplatelets

Morphology-Controlled Synthesis and Magnetic Property of Pseudocubic Iron Oxide Nanoparticles

Α-Fe2o3 Nanocrystals: Controllable SSA-Assisted Hydrothermal Synthesis, Growth Mechanism, and Magnetic Properties

Process Parameters for Synthesis of Flake Nanosized SrSO4 with Chemical Precipitation Method

Facile Morphology Control During Rapid Fabrication of Nanosized Organosilica Particles

Phase controlled synthesis of (Mg, Ca, Ba)-ferrite magnetic nanoparticles with high uniformity

Controlled synthesis, characterization, and crystallization of Ni-P nanospheres.

Size Effect on Crystal Morphology of Faceted Face-Centered Cubic Fe Nanoparticles

Synthesis of size-controlled hollow Fe<sub>3</sub>O<sub>4</sub> nanospheres and their growth mechanism

Morphology Control of Nanoscale PbS Particles in a Polyol Process