Abstract:The carbonization method for preparing Nano ZnO is characterized by its simplicity, ease of reaction control, high product purity, environmental friendliness, and potential for CO2 recycling. However, traditional carbonization processes suffer from poor heat and mass transfer, leading to in situ growth and agglomeration, resulting in low carbonization efficiency, small specific surface area, and inferior product performance. To enhance micro-mixing and mass transfer efficiency, ZnO derived from zinc ash calcination was used as the raw material, and hydrodynamic cavitation technology was employed to intensify the carbonization reaction process. The reaction mechanism of hydrodynamic cavitation was analyzed, and a single-factor experimental study investigated the effects of reaction time, reaction temperature, solid–liquid ratio, calcination temperature, incident angle, cavitation number, and position height on the specific surface area and carbonization rate of Nano ZnO. The response surface method was utilized to explore the significance of the three most influential factors—solid–liquid ratio, cavitation number, and position height—on the carbonization rate and specific surface area. The products were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), laser particle size analysis, and specific surface area analysis. The results showed that the optimal process parameters were a reaction temperature of 80 °C, a reaction time of 120 min, a solid–liquid ratio of 5.011:100, a calcination temperature of 500 °C for 1 h, an incident angle of 60°, a cavitation number of 0.366, and a position height of 301.128 mm. The interaction between solid–liquid ratio and position height significantly influenced the process parameter variations. Under these conditions, the specific surface area and carbonization rate were 63.190 m2/g and 94.623%, respectively. The carbonized product was flaky Nano ZnO with good dispersion and small particle size. Compared to traditional mechanical stirring and bubbling methods, the specific surface area increased by 1.5 times, the carbonization rate improved by 10%, and the particle size decreased by half, significantly enhancing the product performance.

Preparation of Nanosized Zinc Oxide by Vacuum Oxidation and Kinetic Study of Oxidation

Preparation And Characterization Of One-Dimensional Porous Zinc Oxide Constructed By Nanocrystal

Rod-Like Zinc Oxide Constructed by Nanoparticles: Synthesis, Characterization and Optical Properties

Preparation and characterization of nanocrystalline zinc oxide by a novel solvothermal oxidation route

Evolution of Zinc Oxide Nanostructures Through Kinetics Control.

Experimental Study on Preparation of Nano ZnO by Hydrodynamic Cavitation-Enhanced Carbonization Method and Response Surface Optimization

Study on Preparation of Nano-ZnO by Zinc Hypoxide in Rotary Hearth Furnace

Preparation and Photoluminescence of ZnO with Nanostructure by Hollow-Cathode Discharge

Preparation of Nanometer Zinc Oxide Powders by Plasma Pyrolysis Technology and Their Applications.

Preparation and characterization of ZnO nanorods

Preparation of nano zinc oxide by alkaline treatment of industrial zinc oxide dust

Rapid Synthesis and Photocatalytic Performance of Milky and Rod-like Nanometer Zinc Oxide by Combustion Method

Preparation of ZnO Nanoparticles with Membrane Dispersion Mini-reactor

Chemistry Preparation Technique and Progress of Nanoparticle Zinc Oxide

Preparation of Highly Dispersed and Small-Sized ZnO Nanoparticles in a Membrane Dispersion Microreactor and Their Photocatalytic Degradation

Nanosize Powders of Zinc Oxide Produced by Electrical Explosion of Zinc Wires

Control over the Surface Properties of Zinc Oxide Powders via Combining Mechanical, Electron Beam, and Thermal Processing

Properties of Nanocrystalline Zinc Oxide Thin Films Prepared by Thermal Decomposition of Electrodeposited Zinc Peroxide

Research on Directly Obtaining Nanometer ZnO Powder from Zinc-Oxide Ores

Preparation of dispersive zinc oxide nano-particles via hydrothermal modification route

Optical and Field Emission Properties of Zinc Oxide Nanostructures.