Abstract:Currently, layered Ni-rich cathodes of LiNi x Mn y Co z O 2 ( x ≥ 0.8) have gained significant attention for high energy density Li-ion batteries (LIBs) owing to their high specific capacity of ∼200 mA h g −1 within a limited voltage range. However, the large-scale use of these cathodes is severely limited by their poor structural stability, high surface reactivity, and severe capacity fading resulting from intergranular microcracks triggered by large volume changes and formation of rock salt in the highly de-lithiated state. Considering the demand for high specific capacity and high cycling stability cathodes, a core–shell oxide material 0.8LiNi 0.85 Mn 0.10 Co 0.05 O 2 –0.2Li 1.2 Ni 0.16 Mn 0.56 Co 0.08 O 2 (NR-CS) with a Ni-rich oxide core of LiNi 0.85 Mn 0.10 Co 0.05 O 2 (NMC85) and an outer shell of a Mn-based Li-rich Li 1.2 Ni 0.16 Mn 0.56 Co 0.08 O 2 oxide is synthesized. The NR-CS material delivered an initial discharge capacity of 212 mA h g −1 when cycled at 20 mA g −1 (0.1C rate) in the potential range of 2.8–4.3 V vs. Li with 89% capacity retention after 120 cycles when tested in half-cells using Li anodes. Additionally, we compared its performance with Ni-rich oxide NMC85 alone and with integrated materials of both Ni-rich and Mn-based Li-rich oxides (NR–LR). It was found that the Ni-rich oxide NMC85 cathodes could deliver a specific capacity of 216 mA h g −1 with around 67% capacity retention, and those comprising the Li and Mn-rich NMC material possessed a specific capacity of 140 mA h g −1 with 71.4% capacity retention when cycled under similar experimental conditions at 0.1C in the potential range of 2.8–4.3 V vs. Li after 120 cycles. Thus, the core–shell structure benefits from the high capacity of the core (Ni-rich NMC85) and surface chemical stability of the Mn-based Li-rich oxide. Moreover, when tested in full Li-ion cells with pre-lithiated graphite anodes, graphite‖NR-CS cells could provide a discharge capacity of about 170 mA h g −1 and an energy density of 274 W h kg −1 during 200 cycles when cycled at 0.5C rate. Thus, this study highlights the importance of the core–shell structure of Ni-rich NMC oxide cathodes over Ni-rich oxide or Li- and Mn-rich NMC cathodes in providing high capacity, higher rate and better cycling stability when charged up to 4.3 V in LIBs.

A Strategy of Constructing Spherical Core-Shell Structure of Li1.2Ni0.2Mn0.6O2@Li1.2Ni0.4Mn0.4O2 Cathode Material for High-Performance Lithium-Ion Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Core-shell structure LiNi0.8Co0.1Mn0.1O2 cathode material with improved electrochemical performance at high voltage

Synthesis and Electrochemical Characteristics of Li₁.₂(Ni₀.₂Mn₀.₆)ₓ(Co₀.₄Mn₀.₄)y(Ni₀.₄Mn₀.₄)₁₋ₓ₋yO₂ (0 ≤ X + Y ≤ 1) Cathode Materials for Lithium Ion Batteries

Synthesis and Characterization of the Lithium-Rich Core–Shell Cathodes with Low Irreversible Capacity and Mitigated Voltage Fade

Spinel LiNi0.5Mn1.5O4 shell enables Ni-rich layered oxide cathode with improved cycling stability and rate capability for high-energy lithium-ion batteries

Synthesis and Electrochemical Performance of Core-Shell Structured LiNi0.5Mn1.5O4 Microspheres for Lithium Ion Batteries

Architecting “Li-rich Ni-rich” core-shell layered cathodes for high-energy Li-ion batteries

High-Performance Lithium-Rich Layered Oxide Material: Effects of Preparation Methods on Microstructure and Electrochemical Properties

Binary-compositional core-shell structure Ni-rich cathode material with radially oriented primary particles in shell for long cycling lifespan lithium-ion batteries

High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries

Synthesis Method for Long Cycle Life Lithium-Ion Cathode Material: Nickel-Rich Core-Shell LiNi 0.8 Co 0.1 Mn 0.1 O 2 .

Construction of Core-Shell Li3PO4@LiNi0·5Co0·2Mn0·3O2 Cathode with Improved Cycling Stability for Lithium Ion Batteries

Well-ordered Layered LiNi 0.8 Co 0.1 Mn 0.1 O 2 Submicron Sphere with Fast Electrochemical Kinetics for Cathodic Lithium Storage

Na-Rich Layered Transition Metal Oxides with Core/Shell Structures for Improved Performance of Sodium-Ion Batteries

Well-ordered layered LiNi0.8Co0.1Mn0.1O2 submicron sphere with fast electrochemical kinetics for cathodic lithium storage

A Novel Synthesis Strategy to Improve Cycle Stability of LiNi 0.8 Mn 0.1 Co 0.1 O 2 at High Cut-off Voltages Through Core-Shell Structuring

Simple Glycerol-Assisted and Morphology-Controllable Solvothermal Synthesis of Lithium-Ion Battery-Layered Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 Cathode Materials

Coprecipitation-Gel Synthesis and Degradation Mechanism of Octahedral Li1.2Mn0.54Ni0.13Co0.13O2 as High-Performance Cathode Materials for Lithium-Ion Batteries

Advantageous electrochemical behaviour of new core–shell structured cathodes over nickel-rich ones for lithium-ion batteries

Study of Spherical Li1.2-xNaxMn0.534Ni0.133Co0.133O2 Cathode Based on Dual Li+/Na+ Transport System for Li-ion Batteries