Abstract:Currently, layered Ni-rich cathodes of LiNi x Mn y Co z O 2 ( x ≥ 0.8) have gained significant attention for high energy density Li-ion batteries (LIBs) owing to their high specific capacity of ∼200 mA h g −1 within a limited voltage range. However, the large-scale use of these cathodes is severely limited by their poor structural stability, high surface reactivity, and severe capacity fading resulting from intergranular microcracks triggered by large volume changes and formation of rock salt in the highly de-lithiated state. Considering the demand for high specific capacity and high cycling stability cathodes, a core–shell oxide material 0.8LiNi 0.85 Mn 0.10 Co 0.05 O 2 –0.2Li 1.2 Ni 0.16 Mn 0.56 Co 0.08 O 2 (NR-CS) with a Ni-rich oxide core of LiNi 0.85 Mn 0.10 Co 0.05 O 2 (NMC85) and an outer shell of a Mn-based Li-rich Li 1.2 Ni 0.16 Mn 0.56 Co 0.08 O 2 oxide is synthesized. The NR-CS material delivered an initial discharge capacity of 212 mA h g −1 when cycled at 20 mA g −1 (0.1C rate) in the potential range of 2.8–4.3 V vs. Li with 89% capacity retention after 120 cycles when tested in half-cells using Li anodes. Additionally, we compared its performance with Ni-rich oxide NMC85 alone and with integrated materials of both Ni-rich and Mn-based Li-rich oxides (NR–LR). It was found that the Ni-rich oxide NMC85 cathodes could deliver a specific capacity of 216 mA h g −1 with around 67% capacity retention, and those comprising the Li and Mn-rich NMC material possessed a specific capacity of 140 mA h g −1 with 71.4% capacity retention when cycled under similar experimental conditions at 0.1C in the potential range of 2.8–4.3 V vs. Li after 120 cycles. Thus, the core–shell structure benefits from the high capacity of the core (Ni-rich NMC85) and surface chemical stability of the Mn-based Li-rich oxide. Moreover, when tested in full Li-ion cells with pre-lithiated graphite anodes, graphite‖NR-CS cells could provide a discharge capacity of about 170 mA h g −1 and an energy density of 274 W h kg −1 during 200 cycles when cycled at 0.5C rate. Thus, this study highlights the importance of the core–shell structure of Ni-rich NMC oxide cathodes over Ni-rich oxide or Li- and Mn-rich NMC cathodes in providing high capacity, higher rate and better cycling stability when charged up to 4.3 V in LIBs.

Core-shell structure LiNi0.8Co0.1Mn0.1O2 cathode material with improved electrochemical performance at high voltage

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

A Novel Synthesis Strategy to Improve Cycle Stability of LiNi 0.8 Mn 0.1 Co 0.1 O 2 at High Cut-off Voltages Through Core-Shell Structuring

Binary-compositional core-shell structure Ni-rich cathode material with radially oriented primary particles in shell for long cycling lifespan lithium-ion batteries

Improving electrochemical performance of NCM811 cathodes for lithium-ion batteries via consistently arranging the hexagonal nanosheets with exposed {104} facets

Mo-doped LiNi[math]Co[math]Mn[math]O2 cathode materials with improved performance for lithium ion batteries

Enhanced electrochemical performance of cobalt oxide layers coated LiNi0.8Co0.1Mn0.1O2 by polyvinylpyrrolidone-assisted method cathode for Li-ion batteries

Synthesis Method for Long Cycle Life Lithium-Ion Cathode Material: Nickel-Rich Core-Shell LiNi0.8Co0.1Mn0.1O2

Spinel LiNi0.5Mn1.5O4 shell enables Ni-rich layered oxide cathode with improved cycling stability and rate capability for high-energy lithium-ion batteries

Novel design of core shell structure by NCA modification on NCM cathode material to enhance capacity and cycle life for lithium secondary battery

Synthesis and Characterization of the Lithium-Rich Core–Shell Cathodes with Low Irreversible Capacity and Mitigated Voltage Fade

Advantageous electrochemical behaviour of new core–shell structured cathodes over nickel-rich ones for lithium-ion batteries

Experimental and mechanism research of gradient structured LiNi0.8Co0.1Mn0.1O2 cathode material for Li-ion batteries

Enhancing surface stability of LiNi0.8Co0.1Mn0.1O2 cathode with hybrid core-shell nanostructure induced by high-valent titanium ions for Li-ion batteries at high cut-off voltage

Lithium-conductive LiNbO3 Coated High-Voltage LiNi0.5Co0.2Mn0.3O2 Cathode with Enhanced Rate and Cyclability

1D Core‐shell MnO@S, N Co‐doped Carbon for High Performance Lithium Ion Battery Anodes

Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating

A highly promising high-nickel low-cobalt lithium layered oxide cathode material for high-performance lithium-ion batteries

Core–Shell Structure and X‐Doped (X = Li, Zr) Comodified O3‐NaNi 0.5 Mn 0.5 O 2 : Excellent Electrochemical Performance As Cathode Materials of Sodium‐Ion Batteries

Hierarchical Porous LiNi1/3Co1/3Mn1/3O2 Nano-/Micro Spherical Cathode Material: Minimized Cation Mixing and Improved Li+ Mobility for Enhanced Electrochemical Performance

Enhanced electrochemical performance of LiV2O4-coated and V4+-doped LiNi0.8Co0.1Mn0.1O2 cathode for lithium-ion batteries