Abstract:<p>Multiphase microstructures containing film‐like carbon‐enriched austenite as well as martensite matrix, represent an ideal microstructure that can facilitate the break‐through of the trade‐off between strength and toughness, as well as good low‐temperature toughness in high‐strength steels. In this study, to determine the impact of film‐like carbon‐enriched austenite on the toughness of low‐carbon high‐strength steel, quenching and low‐temperature partitioning process was applied to a newly designed alloy. The quenching step resulted in a mixed microstructure consisting of a martensite matrix with high dislocation density and film‐like retained austenite, which was stabilized via carbon enrichment during tempering at 200 ºC for 60 min. Thus, the produced high‐strength steel specimen showed excellent mechanical properties (yield strength = 1201 MPa and tensile strength = 1550 MPa) as well as superior toughness (68.8 J at ‐60 ºC). Its strength primarily resulted from dislocation strengthening, grain boundary strengthening, and solid solution strengthening, and its superior low‐temperature toughness was associated with the film‐like carbon‐enriched austenite, which relaxed local stress, dissipated the plastic energy at the micro‐crack tip, and delayed the initiation and propagation of cracks. Finally, a schematic diagram was designed to elucidate the effect of the retained austenite stabilization on the ductile‐brittle transition temperature.</p><p>This article is protected by copyright. All rights reserved.</p>

The Role of Cu and Al Addition on the Microstructure and Fracture Characteristics in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels with Superior Toughness

Toughness Improvement by Cu Addition in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels

On the role of Cu addition in toughness improvement of coarse grained heat affected zone in a low carbon high strength steel

Quantitative Analysis of Microstructure and Impact Toughness in the Simulated Coarse-Grained Heat-Affected Zone of Cu-bearing Steels

The role of copper in microstructure and toughness of intercritically reheated coarse grained heat affected zone in a high strength low alloy steel

Research on the mechanism of Cu addition on the grain boundary characteristics and toughness in CGHAZ of low carbon low alloy steel

Toughness Improvement By Zr Addition In The Simulated Coarse-Grained Heat-Affected Zone Of High-Strength Low-Alloy Steels

Effects of Al Addition on the Microstructure of Fe-Mn-Si Ultra-Fine Grain Steel Welded Heat Affected Zone

Improvement of Impact Toughness of Simulated Heat Affected Zone by Addition of Aluminium

Effects of Small Ni Addition on the Microstructure and Toughness of Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steel

Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel

Coarse Grain Heat Affect Zone Microstructures and Toughness of X80 Pipeline Steel

Coarse Grained Heat-Affected Zone Microstructure and Brittleness of Ti-Nb-B Microalloyed High Toughness and Wear Resistant Steel

Microstructure and Mechanical Properties of Simulated Unaltered Coarse Grained Heat Affected Zones of 10crni3mov Steel by Double-Sided Double Arc Welding

Dominating Role of Film‐Like Carbon‐Enriched Austenite for the Simultaneous Improvement of Strength and Toughness in Low‐Carbon Steel

Effect of inclusions on toughness and microstructures in simulated coarse-grain heat-affected zones of Al/Ti deoxidised and Nb/V microalloyed steels

Effect of Ce Content on Microstructure-Toughness Relationship in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels

Effects of Ti and Cu Addition on Inclusion Modification and Corrosion Behavior in Simulated Coarse-Grained Heat-Affected Zone of Low-Alloy Steels

Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure

Effect of step cooling process on microstructures and mechanical properties in thermal simulated CGHAZ of an ultra-high strength steel

Favorable Impact Toughness of High Heat Input Coarse-Grained HAZ in an Ultra-Low Carbon High-Strength Microalloyed Steel