Abstract:The accurate assessment of creep–fatigue interaction is an important issue for industrial components operating with large cyclic thermal and mechanical loads. An extensive review of different aspects of creep fatigue interaction is proposed in this paper. The introduction of a high temperature creep dwell within the loading cycle has relevant impact on the structural behavior. Different mechanisms can occur, including the cyclically enhanced creep, the creep enhanced plasticity and creep ratchetting due to the creep fatigue interaction. A series of crucial parameters for crack initiation assessment can be identified, such as the start of dwell stress, the creep strain, and the total strain range. A comparison between the ASME NH and R5 is proposed, and the principal differences in calculating the aforementioned parameters are outlined. The linear matching method (LMM) framework is also presented and reviewed, as a direct method capable of calculating these parameters and assessing also the steady state cycle response due to creep and cyclic plasticity interaction. Two numerical examples are presented, the first one is a cruciform weldment subjected to cyclic bending moment and uniform high temperature with different dwell times. The second numerical example considers creep fatigue response on a long fiber reinforced metal matrix composite (MMC), which is subjected to a cycling uniform thermal field and a constant transverse mechanical load. All the results demonstrate that the LMM is capable of providing accurate solutions, and also relaxing the conservatisms of the design codes. Furthermore, as a direct method, it is more efficient than standard inelastic incremental finite element analysis.

Evaluation of simplified creep design methods based on the case analysis of tee joint at elevated temperature

Assessment on Stress Estimation Method for Creep Evaluation of Components at Elevated Temperature Within Elastic Analysis Routine

AN ANALYSIS OF ELASTIC-PLASTIC-CREEP DAMAG FOR SMALL PUNCH CREEP TEST

Creep Analysis for Pressurized Components Under Creep Conditions Based on Isochronous Stress-Strain Curve and Elastic-Perfectly Plastic Material Model

Creep Behaviors Calculated by Varying Material Constants Obtained from Different Stress Regions for a Closed-End P91 Pipe

An elastic-plastic-creep finite element analysis for small punch creep test specimens

A Whole-Section Failure Criterion for Creep Life Evaluation of Components at Elevated Temperatures

A New Approach to Evaluate Material Creep Properties by C-shape Ring Specimen with Fixed Constraints

Study on the Creep Property by Small Beam Specimen With Fixed Constraints

Creep Rupture Limit Analysis for Engineering Structures under High-Temperature Conditions

Study on the creep property by small beam specimen with fixed constraint

Safety assessment method for defective structures in creep regime

Maximum Steady Stress of Various Cross-Section Beams under Combined Loadings During Creep

Numerical Schemes Based on the Stress Compensation Method Framework for Creep Rupture Assessment

A Review of Creep Analysis and Design under Multi-Axial Stress States

On Creep Fatigue Interaction of Components at Elevated Temperature

Multi-axial Stress Creep Testing Methods for High Temperature Materials

CREEP DEFORMATION ANALYSIS OF A PIPE SPECIMEN BASED ON CREEP DAMAGE EVALUATION METHOD

Creep reliability assessment of structural components at elevated temperatures considering the time dependent feature of representative stress

A Probabilistic Evaluation Method on Temperature and Time-Dependent Stress Intensity Limit St in Creep Assessment of Components at Elevated Temperatures

Multi-axial Creep-Fatigue Analysis of a Cracked Groove Structure Subjected to Cyclic Thermal Loading