Abstract:The accurate assessment of creep–fatigue interaction is an important issue for industrial components operating with large cyclic thermal and mechanical loads. An extensive review of different aspects of creep fatigue interaction is proposed in this paper. The introduction of a high temperature creep dwell within the loading cycle has relevant impact on the structural behavior. Different mechanisms can occur, including the cyclically enhanced creep, the creep enhanced plasticity and creep ratchetting due to the creep fatigue interaction. A series of crucial parameters for crack initiation assessment can be identified, such as the start of dwell stress, the creep strain, and the total strain range. A comparison between the ASME NH and R5 is proposed, and the principal differences in calculating the aforementioned parameters are outlined. The linear matching method (LMM) framework is also presented and reviewed, as a direct method capable of calculating these parameters and assessing also the steady state cycle response due to creep and cyclic plasticity interaction. Two numerical examples are presented, the first one is a cruciform weldment subjected to cyclic bending moment and uniform high temperature with different dwell times. The second numerical example considers creep fatigue response on a long fiber reinforced metal matrix composite (MMC), which is subjected to a cycling uniform thermal field and a constant transverse mechanical load. All the results demonstrate that the LMM is capable of providing accurate solutions, and also relaxing the conservatisms of the design codes. Furthermore, as a direct method, it is more efficient than standard inelastic incremental finite element analysis.

Creep reliability assessment of structural components at elevated temperatures considering the time dependent feature of representative stress

Study on Creep Behavior and Fracture Life Prediction Method of P92 Steel Based on Finite Element Analysis

Fatigue-Creep Interaction Of P92 Steel And Modified Constitutive Modelling For Simulation Of The Responses

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

Evaluation of the Effect of Various Prior Creep-Fatigue Interaction Damages on Subsequent Tensile and Creep Properties of 9%cr Steel

Creep Behaviors Calculated by Varying Material Constants Obtained from Different Stress Regions for a Closed-End P91 Pipe

Creep Rupture Limit Analysis for Engineering Structures under High-Temperature Conditions

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

On Creep Fatigue Interaction of Components at Elevated Temperature

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

Microstructural Damage Mechanics-Based Model for Creep Fracture of 9%cr Steel under Prior Fatigue Loading

The Relative Significance of Internal Damage Mechanisms on the Overall Creep Damage and Ultimate Failure of P91 Steel

Assessment of Creep Behavior Using a Damage-Coupled Model for Martensitic Stainless Steel

A new creep damage assessment method for metallic material under variable load conditions at elevated temperature

System-level creep-fatigue reliability evaluation by engineering damage mechanics incorporating cumulative damage-damage threshold interference

Numerical Schemes Based on the Stress Compensation Method Framework for Creep Rupture Assessment

An improved life prediction strategy at elevated temperature based on pure creep and fatigue data: Classical strain controlled and hybrid stress-strain controlled creep-fatigue test

Time-dependent Reliability Assessment for Mass Concrete Structures

Creep-fatigue interactions in a polycrystalline structural material under typical high-temperature power plant operating conditions

Residual Life Assessment of In-Service High Temperature Components by Small Punch Creep Test