Abstract:Unbound permeable aggregate base (UPAB) materials with strong load-transmitting skeleton yet adequate inter-connected pores are desired for use in the sponge-city initiative. However, the micro-scale fabric evolution and instability mechanism of macroscopic strength behavior of such UPAB materials still remain unclear. In this study, virtual monotonic triaxial compression tests were conducted by using the discrete element method (DEM) modeling approach on specimens with different gradations quantified by the parameter of gravel-to-sand ratio (G/S). The realistic aggregate particle shape and inter-particle contact behavior were properly considered in the DEM model. The micromechanical mechanisms of the shearing failure of such UPAB materials and their evolution characteristics with G/S values were disclosed from contact force chains, microstructures, and particle motion. It was found that the proportion of rotating particles in the specimens decreased and the proportion of relative sliding between particles increased as the content of fine particles decreased. The plastic yielding of the specimens originated from the failure of contact force chains and the occurrence of the relative motion between particles, while the final instability was manifested by the large-scale relative motion among particles along the failure plane (i.e., changes in the internal particle topology). By comparing the macroscopic strength, microstructure evolution, and particle motion characteristics of the specimens with different G/S values, it was found that the specimens with G/S value of 1.8 performed the best, and that the G/S value of 1.8 could be regarded as the threshold for separating floating dense and skeletal gap type packing structures. The variation of Euler angles of rotating particles was significantly reduced in the particle size range of 4.75 mm to 9.50 mm, indicating that this size range separates most of the particles from rolling and sliding. Since particle rolling and sliding behavior are directly related to shear strength, this validates the rationality of the parameter G/S for controlling and optimizing gradations from the perspective of particle movement. The findings could provide theoretical basis and technical guidance for the effective design and efficient utilization of UPAB materials.

Investigation on the packing behaviors and mechanics of Li4SiO4 pebble beds by discrete element method

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

DEM Study of the Stress Fields Around the Closed-Ended Displacement Pile Driven in Sand

Study on the packing characteristics of a special “J” shape ceramic packed pebble bed based on discrete element modeling

Exploring Packing Density, Critical State, and Liquefaction Resistance of Sand-Fines Mixture Using DEM

Packing of Cylindrical Particles: DEM Simulations and Experimental Measurements

Numerical Study on Discharging Characteristics of Pebble Cluster Flow in Pebble Bed

Investigation of cyclic liquefaction with discrete element simulations

Fiber Reinforcement on Spherical Granular Beds under Triaxial Compressions

Effects of coefficient of friction and coefficient of restitution on static packing characteristics of polydisperse spherical pebble bed

Research on discrete element simulation of slump test for fresh self-compacting concrete

Automated Particle Shape Identification and Quantification for DEM Simulation of Rockfill Materials in Subgrade Construction

Voidage Correction Method for DEM Study of 3D Pebble Flows in a Bed of Cycloidal Base

The effect of particle size distribution and shape on the microscopic behaviour of loess via the DEM

SIMULATION BASED ON DISCRETE ELEMENT METHOD AND EXPERIMENT ON FLOW AND PACKING BEHAVIOR OF PARTICLES

Discrete Element Modeling of Instability Mechanisms of Unbound Permeable Aggregate Base Materials in Triaxial Compression

Study on the Mechanical Behavior of Sands Using 3D Discrete Element Method with Realistic Particle Models

DEM simulation of microscopic structure and macroscopic mechanical behavior of clay in oedometer and triaxial compression tests

A numerical investigation on the mechanical properties of hydrate-bearing sand using Distinct Element Method

Compaction Effects on Permeability of Spherical Packing

Investigation of the effect of microbial-induced calcite precipitation treatment on bio-cemented calcareous sands using discrete element method