Abstract:Purpose – Rock-fill dams are embankments of compacted free-draining granular earth containing an impervious zone. Earth utilized in such dams often contains a high percentage of large particles – hence the term rock-fill. Mass stability of these dams results from friction and particle interactions rather than through a cementing agent binding the particles together. However, high-stress conditions and prolonged exposure to the elements can severely damage rock-fill. Therefore, understanding and modeling rock-fill breakage is important for dam engineering. The purpose of this paper is to improve discontinuous deformation analysis (DDA) techniques for modeling rock-fill breakage, proving the new method using simulations of spherical particle crushing. Design/methodology/approach – This work models rock-fill as bonded ellipsoid particles, and develops an improved DDA method to model the breakage of particle assemblies. The paper starts by describing the principles of three-dimensional DDA for spherical particles, and then derives the submatrices for normal contact, shear contact, and frictional force. The new algorithm incorporates a bond model with a revised open-close iteration algorithm into the DDA method to simulate particle crushing. To validate the improved DDA method, calculated particle contacts and movements are validated against theoretical results. Finally, this work performs a series of point-loading experimental tests for cement ellipsoid particles of both high and low compression strengths, with the test results compared against the results from corresponding DDA simulations. Findings – In particle crushing tests, the force and displacement show an approximately linear relationship until the crushing point, at which point low compression ellipsoid particles split into several large pieces while the high-compression particles break into many small fragments. The DDA simulation results are in good agreement with the crushing tests, demonstrating the validity of the DDA method for solving particle crushing problems. Although the improved DDA model is applicable to rock-fill particle crushing studies, some issues remain, particularly in increasing calculation efficiency and performing large-scale computations and long real-time simulations. Future research should address these issues. Originality/value – A bond model with a revised open-close iteration algorithm is incorporated into the DDA method. The simulated results shed insight into rock-fill crushing mechanisms, an element of concern in engineering practices.

Automated Particle Shape Identification and Quantification for DEM Simulation of Rockfill Materials in Subgrade Construction

Simulation of Front End Loader Bucket–soil Interaction Using Discrete Element Method

Discrete Element Modeling of the Effect of Particle Shape on Creep Behavior of Rockfills

A systematic framework for DEM study of realistic gravel-sand mixture from particle recognition to macro- and micro-mechanical analysis

DEM Simulation of Shearing Rockfills along Different Stress Paths

Micromechanical Particle Interactions in Railway Ballast Through DEM Simulations of Direct Shear Tests

Discrete Element Modelling of a Soil-Rock Mixture Used in an Embankment Dam

Calibration of the microparameters of the discrete element method using a relevance vector machine and its application to rockfill materials

Developing an Advanced ANN-based Approach to Estimate Compaction Characteristics of Highway Subgrade

Investigation of the compaction behaviour of sand-gravel mixtures via DEM: Effect of the sand particle shape under vibration loading

Discrete Simulation of Vibratory Roller Compaction of Field Rockfills

Research and application on large-scale coarse-grained soil filling characteristics and gradation optimization

DEM Simulation of the Behavior of Rockfill Sheared with Different Intermediate Principle Stress Ratios

Particle Crushing Simulations with Improved Discontinuous Deformation Analysis

Analysis on Control Indicators for Settlement and Deformation of the Rock-Filled Subgrade in Mountainous Area

Experimental investigation of statistical characteristics of elastic mechanical parameters and strength indexes of rockfill particles

Experimental Simulation and a Reliable Calibration Method of Rockfill Microscopic Parameters by Considering Flexible Boundary

Effect of gradation on macro-meso shear properties of the alluvial-diluvial soil-rock mixture (ADSRM)

Examination of Interface Roughness and Particle Morphology on Granular Soil–structure Shearing Behavior Using DEM and 3D Printing

“Critical Particle Size” and Ballast Gradation Studied by Discrete Element Modeling

Three-dimensional morphological characteristics of particles in nature and its application for DEM simulation