Abstract:Effective thermal conductivity and thermal tortuosity are crucial parameters for evaluating the effectiveness of heat conduction within porous media. The direct pore-scale numerical simulation method is applied to investigate the heat conduction processes inside porous structures with different morphologies. The thermal conduction performances of idealized porous structures are directly compared with real foams across a wide range of porosity. Real foam structures are reconstructed using X-ray computed tomography and image processing techniques, while Kelvin and Weaire-Phelan structures are generated through periodic unit cell reconstruction. The detailed temperature fields inside the porous structures are determined by solving the heat conduction equation at the pore scale. The results present that the equivalent thermal conductivity of Kelvin and Weaire-Phelan structures is similar to and greater than that of the real foam structure with the same strut porosity. The thermal tortuosity of real foam structure is relatively larger and the heat conduction path becomes straighter by adopting the anisotropic design. The thermal tortuosity of the fluid channels for Kelvin, Weaire-Phelan, and real foam structures is close to one. The thermal conductivity of porous structures with heat transfer fluid increases as the thermal conductivity ratio of fluid to solid becomes larger. A small porosity of porous media leads to a larger equivalent thermal conductivity due to the dominant contribution of porous skeleton in the heat conduction process. Correlations derived from parallel and series models, as well as the Maxwell-Eucken models, provide decent predictions of effective thermal conductivity, with an average error of less than 8% in the entire range of thermal conductivity ratio.

Experimental and Numerical Study on Pore-Scale Spectral Radiative Properties of Ni Foam

Effect analysis of edge layers on volumetric radiative properties of nickel foams

Experimental Investigation of Supersonic Radiation Propagation in Low-Density Plastic and Copper-Doped Foams

A Pore-Scale Visualized Study of Melting Heat Transfer of a Paraffin Wax Saturated in a Copper Foam: Effects of the Pore Size

Numerical and experimental characterization of high-temperature heat transfer in a ceramic foam with dual-scale porosity

Identification of spectral radiative properties of closed cell polymeric foams using coupled Monte Carlo-particle swarm optimization

3D visualized characterization of radiation energy transport in a real semitransparent foam strut under high irradiation beam

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Spectral radiative properties of micro-scaled structure inner alumina ligament in open cell foam

Effect of pore size and porosity distribution on radiation absorption and thermal performance of porous solar energy absorber

Optical properties of the polymeric radiative cooler with embedded nano/micro-particles

Synthesis and mechanism investigation of wide-bandwidth Ni@MnO2 NS foam microwave absorbent

Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies

Simulation of radiative transfer in dispersive multiphase systems with supercritical fluidic components

Numerical and experimental study of open-cell foams for the characterization of heat exchangers

High temperature and mesostructure effect on aluminum foam compression responses

Numerical investigations of the coupled conductive-radiative heat transfer in alumina ceramics

Inhibition of leukemic cell proliferation by one or more factors released from splenic BCL1 cells.

Prediction of high-temperature infrared radiative properties of nickel foam ligaments

Performance evaluation of a partially-filled porous foam cylindrical tubular receiver realizing Ni foam material reduction

Numerical Study on Fluid Flow Behavior and Heat Transfer Performance of Porous Media Manufactured by a Space Holder Method