Abstract:Porous media in thermal collectors have been found to enhance the performance of photovoltaic thermal systems. However, there is a lack of comprehensive research on the benefits of using porous media in this context. This paper represents the first comprehensive study comparing various types of porous materials and their effects on system performance. The study employs a three-dimensional simulation to analyze the influence of factors such as material type, porosity, permeability, and thermal conductivity on module efficiency in top, middle, and fully filled configurations. In particular, it has been observed that each material has an optimum porosity, and there is little difference among metal foams, ceramic foams, and ordinary materials, such as aluminum and copper screens. Among the different configurations, the middle configuration had the lowest thermal efficiency improvement (∼17 %), the top configuration increased efficiency by ∼7 %, and the full porous configuration had the highest thermal efficiency improvement, 32 %. Materials with very low conductivity, such as wood, perform better in the middle than in the top configuration. Graphite, despite its high thermal conductivity, has low permeability, which leads to lower thermal efficiency compared to that of most other materials in the top configuration. In the full configuration and particularly in the middle configuration, graphite shows the smallest thermal efficiency improvement due to its significant longitudinal conduction heat transfer. Therefore, in these configurations, graphite is not recommended for use as a porous medium. Regarding added mass, metal foam materials add the most mass to the system, followed by ceramic foam materials, which present considerably lower figures. In all cases, the pump power consumption growth is negligible compared to the photovoltaic power output. In all materials and configurations, there was a small improvement in electrical efficiency, reaching 1.25 % in the full porous configuration. From a holistic perspective, this study showed that porous media can improve the overall equivalent power by up to 9.8 %, compared to a smooth channel.

Effect of pore size and porosity distribution on radiation absorption and thermal performance of porous solar energy absorber

Effect Evaluation of Micro/nano Structured Materials on the Performance of Solar Thermophotovoltaic System: an Analysis Based on Measurement Data

Non-uniform and Volumetric Effect on the Hydrodynamic and Thermal Characteristic in a Unit Solar Absorber

Progress in radiative transfer in porous medium: A review from macro scale to pore scale with experimental test

Analysis on the Effects of Different Receiver Structures and Porous Parameters on the Volumetric Effects and Heat Transfer Performance of Porous Volumetric Solar Receiver

Numerical Investigation on Porous Media Heat Transfer in A Solar Tower Receiver

Experimental and numerical study on the reflectance losses of the porous volumetric solar receiver

A comprehensive investigation of porous media's effects on the performance of photovoltaic thermal systems

Thermo-mechanical performance enhancement of volumetric solar receivers using graded porous absorbers

Experiment and optimization study on the radial graded porous volumetric solar receiver matching non-uniform solar flux distribution

Optical properties of the polymeric radiative cooler with embedded nano/micro-particles

Optimization of solar receivers for high-temperature solar conversion processes: Direct vs. Indirect illumination designs

Pore-to-meter Scale Modeling of Heat and Mass Transport Applied to Thermal Energy Storage: How Local Thermal and Velocity Fluctuations Affect Average Thermal Dispersivity

Effect of Pore Evolution on Thermal Diffusivity and Radiation Characteristics of Thermal Barrier Coatings after High-Temperature Exposures

Controllable Fabrication and Characterization of Porous C/TiO2 Nanocomposite Films As Solar Selective Absorber

Effects of Microscopic Properties on Macroscopic Thermal Conductivity for Convective Heat Transfer in Porous Materials

Experimental study of photothermal conversion of heat absorbers filled with metal foams of different pore densities

Experiment and Numerical Simulation of Effective Thermal Conductivity of Porous Media

Effects of Absorber Emissivity on Thermal Performance of a Solar Cavity Receiver

Experimental Study of the Effect of Porous Media on the Performance of Single-Pass Solar Air Heater

Numerical simulation of efficient solar absorbers and thermal emitters based on multilayer nanodisk arrays