Abstract:Circular electron-positron collider (CEPC) is a 120GeV storage ring-based collider. Due to the small beam size and high single bunch population, the collective effects may bring new challenges to the physical design of the machine. A thorough evaluation of the coupling impedance is necessary in controlling the total impedance of the ring, which can accordingly prevent the occurrence of the beam instability. The primary studies on the impedance and collective effects in CEPC are presented. INTRODUCTION Interaction of an intense charged particle beam with the vacuum chamber surroundings may lead to collective instabilities. These instabilities can induce beam quality degradation or beam loss, and finally restrict the luminosity of the machine. Therefore, beam instability study is essential for designing a new machine. In this paper, the primary calculations of the impedances are first given. Based on the impedance studies, beam instabilities due to single bunch and multi bunch effects are estimated. Instabilities due to interaction of electron beam with the residual ions and positron beam with the electron cloud are also investigated. The main parameters used in the calculation are listed in Table 1. Table 1: Main Parameters of CEPC Parameter Symbol, unit Value Beam energy E, GeV 120 Circumference C, m 54752 Beam current I0, mA 16.6 Bunch number nb 50 Bunch length z, mm 2.65 RF frequency frf, GHz 0.65 Energy spread e 1.6310 Slipping factor p 3.3610 Betatron tune x/y 179.08/179.22 Synchrotron tune s 0.18 Damping time x/y/z, ms 14/14/7 IMPEDANCE Since most of the engineering designs of the vacuum objects are not done yet, only the RF cavities and the resistive wall impedance are considered here. A more complete impedance budget will be obtained as more vacuum components are designed. RF Cavities A five cell superconducting RF cavity structure with RF frequency of 650 MHz will be used in CEPC. Given an accelerating gradient of 15.5 MV/m, 384 cavities will be needed. Since the RF cavities are axisymmetric, the impedance and wake are calculated with the code ABCI [1]. The short range wake at nominal bunch length is shown in Fig. 1. We fit the bunch wake with the analytical model [2] ) ( ) ( ) ( 2 s Lc s Rc s W       , (1) where L and R are effective inductance and resistance, respectively. The calculated loss factor for one RF cavity is kl=2.332 V/pC. Resistive Wall The resistive wall wake for a Gaussian bunch in a cylindrical beam pipe is calculated analytically [3] ) / ( 1 2 8 ) ( 0 2 / 3 c s f Z a cl s W c z     , (2)

Feasibility Study of TPC at Electron Positron Colliders at Z Pole Operation

Feasibility Study of TPC Tracker Detector for the Circular Collider

Feasibility Study of TPC Detector at High Luminosity Z Pole on the Circular Collider

Status and prospects of TPC module and prototype at high luminosity <i>Z</i> physics on CEPC

Performance of the continuous ions suppression TPC prorotype for circular collider

Progress of High Precision TPC Detection Technology for the Future Circular E+e-Collider

Impedance and Collective Effects Studies in CEPC

Erratum: Development of Time Projection Chamber prototype integrated with UV laser tracks for the future circular e<sup>+</sup>e<sup>-</sup> collider

Performance of TPC Detector Prototype Integrated with UV Laser Tracks for the Circular Collider

Impedance driven collective effects in CEPC

A conceptual design of TOF based on MRPC technology for the future electron-positron Higgs factory

The Physics potential of the CEPC. Prepared for the US Snowmass Community Planning Exercise (Snowmass 2021)

Cross Section and Higgs Mass Measurement with Higgsstrahlung at the CEPC

Optimization Study of the Drift Field for TPC Detector in CEPC

Reconstructing K^0_S and in the CEPC baseline detector

Testing Bell inequalities and probing quantum entanglement at CEPC

Study on Cosmic Test and QC Method of High-Rate MRPC for CBM-TOF

The Status of CEPC

CEPC SRF System Design and Challenges

Study of Gas Properties for GEM-Based TPC

Simulation and reconstruction of particle trajectories in the CEPC drift chamber