Effects of Tertiary Air Damper Opening on Flow, Combustion and Hopper Near-Wall Temperature of a 600 MWe Down-Fired Boiler with Improved Multiple-Injection Multiple-Staging Technology

Minhang Song,Lingyan Zeng,Xiaoguang Li,Yibo Liu,Zhichao Chen,Zhengqi Li

DOI: https://doi.org/10.1016/j.joei.2017.03.003

IF: 6.47

2017-01-01

Journal of the Energy Institute

Abstract:In consideration of increasing the tertiary air damper opening of a 600 MWe down-fired boiler with prior multiple-injection multiple-staging technology facilitated the coal burnout, while largely increasing the NOx emissions. Additionally, the flame kernel was greatly moved downwards, thus causing significant temperature variations in the hopper near-wall region and the water wall in the lower furnace was vulnerable to overheating. This work concentrated on the comprehensively improved multiple-injection multiple-staging technology, both 1:20 scale cold aerodynamic tests and industrial experiments were conducted to examine the effects of tertiary air damper opening on flow, combustion, NOx emissions and especially the hopper near-wall temperatures. The aerodynamic tests indicated that, on increasing the tertiary air damper opening from 40 to 70%, all the flow fields exhibit good symmetry. The tertiary air flows downwards along the hopper near-wall region, with a maximum near-wall dimensionless vertical velocity significantly increasing from 0.48 to 0.66, and accordingly, the dimensionless depth of downward airflow increases from 0.744 to 0.846. The industrial experimental results showed that, upon introducing more tertiary air, the ignition distance of fuel-rich coal/air flow shortens from 1.25 to 0.87 m. The coal burnout is enhanced, carbon in fly ash drops from 6.90 to 6.15%, while the NOx emissions slightly increase from 593 to 641 mg/m(3) at 6% O-2. On reducing the measuring height of hopper near-wall temperature from 9.1 to 3.3 m, the average heating rate increases from 0.44 to 0.63 C/mm. The increased tertiary air damper opening presents an increasingly obvious cooling effect on the hopper near-wall region, with the temperature reductions around 50 degrees C, which is conductive to protect the water wall in the lower furnace from overheating. (C) 2017 Energy Institute. Published by Elsevier Ltd. All rights reserved.