Abstract:Thin-walled cold-formed steel (CFS) structures are widely used in low-storey buildings and are seeing increased applications in multi-storey buildings as well as long-span structures. The bolted connection is one of the most common types of fasteners employed in CFS structures. The bolt slippage and load-bearing mechanism in CFS connections have a significant influence on the structural behaviour of cold-formed steel construction assemblies, which are typically numerically simulated using spring/connector elements. However, the determination of input parameters for the spring/connector elements generally requires load-deformation characteristics obtained from physical tests of lap joints, which are costly and time-consuming. Moreover, the use of spring/connector elements fails to explicitly capture the bolt bearing behaviour, resulting in inaccuracy in the simulation of CFS connections. In this paper, an accurate, efficient and robust numerical method that can fully replicate the behaviour of CFS connections considering both the effects of bolt slippage and bearing has been introduced. In the proposed numerical methodology, the cold-formed plates are modelled using the conventional shell elements, while a number of solid elements are introduced around the bolt holes, enabling the bolt-plate interaction to be explicitly accounted for, with contact pairs defined between the bolts and their surrounding solid element surfaces. The proposed numerical method could find a convergence solution using dynamic implicit solver in the general-purpose finite element (FE) software ABAQUS. Good agreement between the FE models using the proposed method and the available test results of CFS bolted connections were achieved, which sheds light on the promising application of the proposed method for simulating CFS assembled using bolted connections.

Effects of Bolt Slip on the Dynamic Characteristics of Transmission Tower-line System

Effects of Bolt Slippage on the Wind Induced Responses of Transmission Tower Line System

Effect of bolt joints on behaviour of transmission tower under external loads

Study on the Effect of Bolt Slippage and Foundation Settlement on the Bearing Capacity of Tower-Line System

Research on the Slip Model of Main Member Bar Connection of Transmission Tower Using Bolts

Seismic response study of a steel lattice transmission tower considering the hysteresis characteristics of bolt joint slippage

Effect of bolt tightening force on the transmission tower modal parameters and a method for looseness identification

Preliminary Research of the Effect of Bolt Slippage on the Bearing Capacity of Transmission Towers with Base Unequal Settlement

Mechanical Behavior Analysis of Key Nodes for Extra-highTransmission Tower Foundations

Effect of bolt slippage and joint eccentricity on the response of lattice structure with non-uniform settlement

Bolt Joint Effects on the Ultimate Bearing Capacity of A Lattice Transmission Tower with Non-Uniform Settlement

DYNAMIC RESEARCH OF TRANSMISSION LINES TOWER-LINE SYSTEM

Effect of Bolt Slippage on the Static Response of Lattice Structure

Numerical Simulation of Impact Effect on Stability of Transmission Tower Foundation

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Dynamic Characteristics of Wind-Induced Coupled Vibration Between Conductor and Tower of Transmission Line

Experimental and Computational Simulation for Wind Effects on the Zhoushan Transmission Towers

Effects of supporting structure and bolt connection on the fatigue life and carrying capacity of a slewing bearing

A Precise Three-Dimentional Finite Element Model of Transmission Tower System

The effect of the thickness of steel pipe in linear and 2-dimensional stiffness analysis during design of transmission tower

The Influence of Friction Coefficient on Bolt Looseness under Low Frequency Vibration Via Finite Element Analysis