Abstract:The studies on the mechanisms and performances of the mechanical seals in reactor coolant pumps are very important for the safe operations of the pressurized water reactor power plants. Based on the hydrostatic mechanical seal in reactor coolant pumps, an analytical fluid-solid strong-interaction model is proposed in this paper. According to the design features and operational principles of the seal, an analytical method to calculate the mechanical deformation of the seal assembly is developed based on the ring deformation theory. A strong-interaction algorithm combining the analysis of the mechanical deformation of the seal assembly and flow field between the seal faceplates is utilized, in which the three kinds of equations including the fluid domain, solid domain and coupling action are constituted in the same equations set and all the variables are solved simultaneously. So the analytical fluid-solid strong-interaction model used for the seal is built. Moreover, the model is verified by the experimental results. Based on the model, the design parameters of the seal are studied. Two different conditions of the general case and fixed seal leakage rate are discussed respectively, and the regularities that the seal behaviors are affected by the parameters of the holding screws on the clamp rings and seal faceplates are obtained. The research results can provide a theoretical basis for performance analysis, design and assemblage of the seal. Compared to the numerical methods, the proposed model has the unique advantages of high efficiency, convenience and easy application of constraints.

ANSYS Interference Fit Analysis of Mechanical Seals in Reactor Coolant Pumps

Fluid-solid Strong-Interaction Model of Mechanical Seals in Reactor Coolant Pumps

Experimental Research and Finite Element Analysis of Seals in the Pressure Compensator

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Optimization design for mechanical seals in reactor coolant pumps based on a fluid-solid strong-interaction model

A Numerical Study on Mechanical Seal Dynamic Characteristics Within a Reactor Coolant Pump

Failure Analysis and Improvement of Mechanical Seals in Underwater Turbine

Sealing Performance of Adaptive Contacting Mechanical Seal

Semi-analytical Fluid-solid Coupling Model for Hydrostatic Mechanical Seals

Computational Analysis of Sealing and Stability of a Deformable Floating and Fixed Rings of an Annular Seal

Theoretical Analysis on Fluid-Structure Coupling of Hydrostatic Mechanical Seal

Prelimilary study of analytical methods on geometrical and mechanics properties of O-rings in reactor coolant pumps

Thermal Fluid-Solid Interaction Model and Experimental Validation for Hydrostatic Mechanical Face Seals

Coupling Analysis of Frictional Heat of Fluid Film and Thermal Deformation of Mechanical Seal End Faces

A Study on the Sealing Performance of Metallic C-rings in Reactor Pressure Vessel

Parametric study on a wavy-tilt-dam mechanical face seal in reactor coolant pumps

A Non-Ideal Geometry Based Prediction Approach of Fitting Performance and Leakage Characteristic of Precision Couplings.

An Eccentric 3-D Fluid-Structure Interaction Model for Investigating the Effects of Rod Parallel Offset on Reciprocating-Seal Performance

Modeling ad Hydrodynamic Simulation of Magnetic Fluid Seal Combined with Mechanical Seal

Influence of structural parameters on wavy-tilt-dam hydrodynamic mechanical seal performance in reactor coolant pump