Abstract:The waterproof sealing performance of the shield tail sealing system is an important factor to ensure the safe construction of shield tunnels. This paper focuses on analyzing the shield project of the Wuhan metro, specifically examining the spatial arrangement of the shield tail sealing cavity and tail brush. By incorporating the linear permeability of the tail brush into our model, we aim to conduct numerical simulations using computational fluid dynamics (CFD) to investigate the performance of the shield tail sealing system under high water pressure. This study delves into the flow patterns of water and grease in the event of a failure in the shield tail sealing system. We aim to investigate how various parameters, including the structure of the shield tail brush, properties of the grease used, and other conditions, impact the waterproof sealing performance. The results show that under high-pressure water intrusion into the shield tail sealing system, water tends to permeate primarily through the bottom of the shield tail brush, which exhibits the highest permeability. This creates a dominant flow channel within the grease cavity. The failure process of the shield tail sealing is divided into five stages. Between pressure differences of ΔP = 0 to 1 MPa, the sealing ability of the shield tail shows minimal variation. Increasing the viscosity of grease and reducing the permeability of the tail brush can effectively prolong the breakdown time and enhance the safety capability of the shield tail. Beyond a pressure difference of ΔP = 1 MPa, these measures generally prove ineffective. Utilizing this model and the designated time limit for shield tail failure, we propose optimal grease and tail brush parameters to guide the safe construction of shield tunnels.

Failure Analysis and Improvement of Mechanical Seals in Underwater Turbine

The Wear of Seal Fins During High-Speed Rub Between Labyrinth Seal Fins and Honeycomb Stators at Different Incursion Rates.

Sealing Performance of Adaptive Contacting Mechanical Seal

ANSYS Interference Fit Analysis of Mechanical Seals in Reactor Coolant Pumps

Design of High Pressure Assembled Mechanical Seal Used in Submarine

Numerical Study on Sealing Performance after Wear of Plug Valve During Opening–closing Process

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Theoretical Analysis on Fluid-Structure Coupling of Hydrostatic Mechanical Seal

Analysis and Experimental Research on Efficiency Characteristics of a Deep-Sea Hydraulic Power Source

Analysis and Optimization of Structure Parameters of Hydrostatic Mechanical Seal

Hydrostatic Mechanism of A Wavy-Tilt-Dam Mechanical Seal

Influence of structural parameters on wavy-tilt-dam hydrodynamic mechanical seal performance in reactor coolant pump

Modeling ad Hydrodynamic Simulation of Magnetic Fluid Seal Combined with Mechanical Seal

Sealing Characteristics Analysis of New Subsea Wellhead Sealing Device

Analysis and Experimental Study on the Characteristics of Leakage of Rotary Seal Using Sealing Ring

Numerical Simulation and Critical Threshold Analysis of the Failure Process for Shield Tail Sealing System under High Water Pressure

Mechanical Deformation of Ship Stern-Shaft Mechanical Face Seals

Development of Mechanical Seal for Containment Spray Pump of PWR Nuclear Power Plant

Parametric study on a wavy-tilt-dam mechanical face seal in reactor coolant pumps

Mechanism of a wavy-tilt-dam mechanical seal under different working conditions

Fluid-solid Strong-Interaction Model of Mechanical Seals in Reactor Coolant Pumps