Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Study on Underwater Explosive Welding of Al-Steel Coaxial Pipes

Modeling the Interfacial De-Bonding Behavior Between Steel Wire and Adhesive

Test and Analysis of the Interfacial Bond Behaviour of Circular Concrete-Filled Wire-Arc Additively Manufactured Steel Tubes

Explosive welding of Al alloys and high strength duplex stainless steel by controlling energetic conditions

Microstructure and Erosional Behavior of Erosion-Resistant Coatings of Super-Critical Boiler Pipes

Reverse Schemes of Explosive Cladding of Long-Length Pipe Billets

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Investigation of pipe thickness monitoring using the shear wave EMAT technology with high lift-off distance

Application of the internal protective layer from stainless steel to the surface of long-length pipes with an explosive welding

Interface Microstructure and Mechanical Properties of Nickel/Steel Bimetal Composite Pipe Fabricated by Explosive Welding

A novel dynamic self-constrained explosive welding method for manufacturing copper-steel bimetallic tube

Underwater laser welding of tube-plate structure of aluminum alloy

Microstructure and texture distribution in the bonding interface of Cu/Al composite tube fabricated by explosive welding

Investigation on the interfacial microstructure and mechanical properties of the W-Cu joints fabricated by hot explosive welding

Investigation of the effect of ultrasound during explosion welding on the formation of the structure and properties of the aluminum-steel composite

Explosive welding of aluminium to stainless steel using carbon steel and niobium interlayers

Interface Microstructure and Numerical Simulation Investigations of Ni/TC18 Composite Tube Fabricated by Explosive Welding

A Method of Ultrasonic Phased Array Inspection of Middle-High Pressure Plastic Pipe Reinforced by Cross Helically Wound Steel Wires Electro-Fusion Joint

Numerical Study on Mechanism of Explosive Welding

Interface bonding and mechanical properties of large explosively welded titanium/aluminum composite pipes

Influence of wire parameters on the formability of DP600 steel sheets during wire explosion impact forming