Abstract:Large-scale nonequilibrium molecular dynamics simulation is used to study the effect of grain size and Cr segregation at the twin boundary (TB) on the spalling fracture mechanism of nickel based alloys. In particular, loading waves are designed so that the maximum tensile stress first appears in the grain interior for all the crystals with different grain sizes. In contrast to traditional understandings, no monotonous relationship between the spall strength and the grain size appears in our results. The spall strength is found to depend on the wave attenuation distance measured from the first maximum tensile stress position to the spalled TB as well as the accompanied microstructure evolutions. The number of spalling plane increases with the increase of TB or the decrease of the grain size. As the grain size continues to decrease, a greater impact strength is required to cause spallation fracture at multiple TBs. In this case, the spall strength becomes insensitive to the first maximum tensile stress position. With the increment of solute atom concentration, the number of the spalling plane increases when the solution is segregated. But it decreases when the solution is uniformly distributed. Such a result is explained by segregation-enhanced energy dissipation and interactions between the waves and the microstructures nearby TBs. In particular, the shock wave would induce a local lattice reorientation nearby the TB depending on its segregation degree and the lattice reorientation would modify the slip manner of stacking faults and, thus, affect void nucleation and growth. The lattice reorientation would also contribute to the generation of sub-grain boundaries inside the grains in terms of the movement of stacking faults. Void nucleation at the sub-GB is the main cause of fracture at the grain interior.

Segregation Effects of Y, Ti, Cr and Si on the Intergranular Fracture of Niobium

Atomic Investigation of Alloying Cr, Ti, Y Additions in a Grain Boundary of Vanadium

Effects of Ni, Co, B, and Ge on the microstructures and mechanical properties of Nb-Ti-Si ternary alloys

Atomistic Simulation Study of Grain Boundary Segregation and Grain Boundary Migration in Ni-Cr Alloys

Effects of Minor Si on Microstructures and Room Temperature Fracture Toughness of Niobium Solid Solution Alloys

Implication of site-specific segregation on grain boundary structural transition and deformation response in nanocrystalline Ni-Nb alloy

Effects of Alloying and High-Temperature Heat Treatment on the Microstructure of Nb–Ti–Si Based Ultrahigh Temperature Alloys

Effect of Withdrawal Rates on Microstructures and Room Temperature Fracture Toughness in a Directionally Solidified Nb–Ti–Cr–Si Based Alloy

Microstructure and room temperature fracture toughness of directionally solidified Nb-Ti-Si based ultrahigh temperature alloy

Mechanism of Interstitial Atoms on Oxidation and Fracture of Niobium-Silicon Alloys

Effects of B and Si on the Fracture Toughness of the Nb–Si Alloys

Atomic Insights into the Effects of Nanoscale Intergranular Structures on Grain Boundary Segregation

Mechanism of Solute Hardening and Dislocation Debris-Mediated Ductilization in Nb-Si Alloy

Solute Effects on BCC Fe Σ3 Tilt Grain Boundary: Grain Boundary Segregation, Grain Boundary Stability, and Embrittlement in Nanocrytalline Fe

Influence of the twin boundary and Cr segregation on the spalling of Ni-base alloys by large-scale molecular dynamic simulations

Effect of Cr Segregation on Mechanical Behavior and Deformation Mechanism of Ni─Co─Cr Alloy

Phase-field Crystal Study on the Influence of Nanoscale Intergranular Structures on Grain Boundary Segregation

First-principles investigation of the Mg, Cu segregation at Al Σ5 (310) and Σ9 (221) symmetrical tilt grain boundaries

Segregation Behavior of Alloying Elements and Its Effects on Stacking Fault of Γ′ Phase in Ni-based Superalloys: First-principles Study

Segregation to grain boundaries in disordered systems: an application to a Ni-based superalloy

On the segregation of Re at dislocations in the γ' phase of Ni-based single crystal superalloys