Abstract:Li-Si alloys are considered as a key anode material for advanced silicon-based solid-state batteries (Si-ASSBs) due to their high ionic/electronic conductivity. However, the high content of Li in Li-Si alloys increases the risk of Li dendrites growth and soft short circuits during battery charge. Herein, an all-electrochem-active Si/Li21Si5 composite anode is developed with the rational architecture and optimized ratio of Li21Si5 and pure Si. By utilizing defects in the oxide layer of micron Si, the Li21Si5 alloy is first synthesized separately by a quick and spontaneous Li-Si alloying reaction, followed by its mixing with Si particles by cold-pressing. In this composite anode, the Li21Si5 grains are uniformly distributed among the Si particles, and serve as a soft buffer for Si. Due to the limited self-discharge between Li21Si5 grains and Si particles, the Li21Si5 alloy maintains a lithium-saturated state and functions as a lithium supplement. Meanwhile, it constructs a conductive network in the anode, which can facilitate the transport of lithium ions and induce their storage in Si particles, thus avoiding dendrite formation. Consequently, the Si/Li21Si5-ASSB can achieve an ultra-high initial Coulombic efficiency (ICE) of 97.8% at 25 °C, as well as a low expansion rate of 18.9% at a surprisingly large areal capacity of 17.9 mAh cm−2. This work provides a new method and valuable insight into Li-Si alloy synthesis, and the obtained Si-based anode shows great promise for application in ASSBs.

A Li-ion Oxygen Battery with Li-Si Alloy Anode Prepared by a Mechanical Method

Enhanced Cycling Performance of Li–O2 Battery by Using a Li3PO4-Protected Lithium Anode in DMSO-Based Electrolyte

NonAqueous, Metal-Free, and Hybrid Electrolyte Li-Ion O2 Battery with a Single-Ion-Conducting Separator

A Lithium-Ion Oxygen Battery With A Si Anode Lithiated In Situ By A Li3n-Containing Cathode

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

A high-performance lithium ion oxygen battery consisting of Li2O2cathode and lithiated aluminum anode with nafion membrane for reduced O2crossover

An Ultra-Stable and Enhanced Reversibility Lithium Metal Anode with a Sufficient O2 Design for Li-O2 Battery

A Molten Salt Lithium-Oxygen Battery

A lithium-ion oxygen battery with a Si anode lithiated <i>in situ</i> by a Li<sub>3</sub>N-containing cathode

Metallurgically Lithiated SiOx Anode with High Capacity and Ambient Air Compatibility.

A Unique Hybrid Quasi-Solid-State Electrolyte for Li-O2 Batteries with Improved Cycle Life and Safety

A Safe Organic Oxygen Battery Built with Li‐Based Liquid Anode and MOFs Separator

A Long-Life Lithium Ion Oxygen Battery Based on Commercial Silicon Particles As the Anode

An Oxygen‐Resistant and Self‐Eliminating Passivated Layer for Highly Stable Lithium Metal Batteries

All-electrochem-active silicon anode enabled by spontaneous Li-Si alloying for ultra-high performance solid-state batteries

A SiO2@Al as stable and long-cycle anode for lithium-ion batteries

A Hybrid Structure to Improve Electrochemical Performance of SiO Anode Materials in Lithium-Ion Battery

Prevention of dendrite growth and volume expansion to give high-performance aprotic bimetallic Li-Na alloy–O2 batteries

Building High Performance Silicon–oxygen and Silicon–sulfur Battery by In-Situ Lithiation of Fibrous Si/C Anode

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

High Charging Voltage Stable and Air Atmosphere Stable Li–O 2 Batteries with an Electrolyte Based on Succinonitrile and In Situ Artificial SEI Construction