Abstract:The numerical calculation model of time-varying mesh stiffness, static transmission error and composite mesh error of modified helical gears is developed based on loaded tooth contact analysis (LTCA) model. To minimize the fluctuation of vibration excitation force, the optimal modification parameters of three modification methods under designed applied torque and ideal tooth contact condition are determined, and the effects of three modification methods on time-varying mesh stiffness, static transmission error and composite mesh error are analyzed. In order to analyze the sensitivity of the three modification methods to applied torque and gear misalignment, the effects of applied torque in wide range and gear misalignment on vibration excitation force and dynamic transmission error are investigated. The results show that the difference of time-varying mesh stiffness, static transmission error, composite mesh error of helical gears with different modifications methods are obvious. However, the fluctuation of vibration excitation force of helical gears is reduced significantly. When the applied torque is higher than the designed applied torque, the three modification methods show a great reduction of system vibration. When the applied torque is too low, the vibration of modified helical gears is larger than unmodified ones. Meanwhile, the resonance speed of the helical gears is slightly lower. With the increase of gear misalignment, the resonance speed becomes lower correspondingly and the effect of the three modification methods on the reduction of vibration excitation force is not obvious any more. The results can provide effective reference for establishing robust optimization method for tooth surface modification.

Flank Error Correction of Hypoid Gears Based on Regression Analyses

Quasi-static Tooth Contact Analysis of Hypoid Gear Drive with Coaxiality Deviations

Tooth Surface Error Correction of Hypoid Gears Machined by Duplex Helical Method

Modelling method, simulation and experimental verification of hypoid gear involved tooth surface deviation under manufacturing process

An approximate grinding and deviation correction method for helical face gear

Nonlinear correction of hypoid gear machine tool parameters by duplex helical method

Analysis of machining errors' effects on gear pair meshing using contact finite element method

Computerized determination of the qualified region of main design parameters of face-milled hypoid gears with low shaft angle

Tolerance Modeling of Involute Helical Gear Tooth Surface

General Meshing Modeling and Dynamic Characteristics Analysis of Helical Gear Pair with Tooth Surface Deviation

Active tooth surface design of cycloid hypoid gears

Influences of machine-tool setting errors on mesh behavior for small-module spiral bevel gear

A novel flank correction method for face gear ground by CNC worm wheel grinder

An analytical prediction methodology of the correlation between transmission error and tooth pitch error for face-hobbed hypoid gears

Five-axis flank milling error model of a face gear considering the tool tip dynamics

Sensitivity Analysis of Helical Gears with Tooth Surface Modification to Applied Torque and Gear Misalignment

Mathematical model of spiral bevel and hypoid gears manufactured by the modified roll method

Contact Analysis for Spiral Bevel Gear Based on Machine Parameters

A novel gear flank modification methodology on internal gearing power honing gear machine

Geometric contact characteristics of variable hyperbolic circular-arc-tooth-trace cylindrical gear under different machine tool errors and sensitivity analysis for impact factors

Flank fractures on spiral bevel gears—transfer of analytical methods for the estimation of residual stresses from cylindrical gears to bevel gears