Abstract:Based on the three-dimensional (3D) finite element method (FEM) and Taguchi method (TM), this paper analyzes the tooth surface contact stress (TSCS) of spur gears with three different influence factors: tooth profile deviations (TPD), meshing errors (ME) and lead crowning modifications (LCM), especially researching and analyzing the interactions between TPD, ME and LCM and their degree of influence on the TSCS. In this paper, firstly, a 3D FEM model of one pair of engaged teeth is modeled and the mesh of the contact area is refined by FEM software. In the model, the refined area mesh and the non-refined area mesh are connected by multi-point constraint (MPC); at the same time, in order to save the time of the FEM solution on the premise of ensuring the solution’s accuracy, the reasonable size of the refined area is studied and confirmed. Secondly, the TSCS analyses of gears with one single influence factor (other factors are all ideal) are carried out. By inputting the values of different levels of one single factor into the FEM model, especially using the real measurement data of TPD, and conducting the TSCS analysis under different torques, the influence degree of one single factor on TSCS is discussed by comparing the ideal model, and it is found that when the influence factors exist alone, each factor has a great influence on the TSCS. Finally, through TM, an orthogonal test is designed for the three influence factors. According to the test results, the interactions between the influence factors and the influence degree of the factors on the TSCS are analyzed when the three factors exist on the gear at the same time, and it is found that the TPD has the greatest influence on the TSCS, followed by the lead crowning modified quantity. The ME is relatively much small, and there is obvious interaction between ME and LCM. In addition, the optimal combination of factor levels is determined, and compared with the original combination of a gear factory, we see that the contact fatigue performance of the gear with the optimal combination is much better. The research of this paper has a certain reference significance for the control of TPD, ME and LCM when machining and assembling the gears.

An analytical prediction methodology of the correlation between transmission error and tooth pitch error for face-hobbed hypoid gears

Transmission error modeling and analysis of herringbone gear drive based on the measured manufacturing errors

Quasi-static Tooth Contact Analysis of Hypoid Gear Drive with Coaxiality Deviations

Research on TE analysis method for improving gearing accuracy of hobbing machine

Improved analytical model for calculating mesh stiffness and transmission error of helical gears considering root curve: Theoretical analysis and experiments

Modelling method, simulation and experimental verification of hypoid gear involved tooth surface deviation under manufacturing process

General Meshing Modeling and Dynamic Characteristics Analysis of Helical Gear Pair with Tooth Surface Deviation

Analysis of machining errors' effects on gear pair meshing using contact finite element method

Reliability sensitivity analysis of tooth modification on dynamic transmission error of helical planetary gears

Flank Error Correction of Hypoid Gears Based on Regression Analyses

Geometric contact characteristics and sensitivity analysis of variable hyperbolic circular-arc-tooth-trace cylindrical gear with error theory considered

Static/Dynamic Contact Finite Element Analysis for Tooth Profile Modification of Helical Gears

Effects of machine-tool parameters on geometry and contact pattern for face hobbed hypoid gears

Static and Dynamic Transmission Error Measurements of Helical Gear Pairs With Various Tooth Modifications

Analysis and Optimization of Tooth Surface Contact Stress of Gears with Tooth Profile Deviations, Meshing Errors and Lead Crowning Modifications Based on Finite Element Method and Taguchi Method

Gear Wear Prediction Based on the Theorem of Degradation Entropy Generation

Geometric contact characteristics of variable hyperbolic circular-arc-tooth-trace cylindrical gear under different machine tool errors and sensitivity analysis for impact factors

Correction of tooth surface deviations for aero spiral bevel and hypoid gears

A modeling and tooth contact analysis method of parabolic modified face gear

Optimization of helix angle for helical gear system

Static/dynamic Contact FEA and Experimental Study for Tooth Profile Modification of Helical Gears