Abstract:Poly(lactic acid) (PLA) is a biodegradable plastic and grabs attention in several applications such as biomedical implantation, film, packaging and clothing. Instead, PLA itself has a characteristic of brittleness, resulting in poor mechanical properties, and its slow ability in degradation leads to waste disposal problem. The present research aims to develop material in such a way to have a good combination of properties and optimum degradation ability. The PLA nanocomposites were prepared via melt blending that consisted of two types of carbon nanotubes (CNTs): unmodified carbon nanotubes (CNTs) and modified CNTs (mCNTs). The effect of 5 wt% poly (ethylene glycol) (PEG) as plasticizer on nanocomposites with CNTs material loading at 0.5 wt%, 1.0 wt%, 1.5 wt% and 2.0 wt% was studied. The analysis of physical properties was done using hardness testing and melt flow index (MFI). Neat PLA only gave around 69.0–77.6 Shore D in hardness test, while MFI exhibited around 36.1–39.4 g/10 min. PLA/mCNTs and PLA/PEG/mCNTs at 1.5 wt% exhibited the highest values of hardness testing which were 86.0 and 85.9 Shore D, respectively. In MFI study, the results were 70.0 g/10 min for PLA/mCNTs and 80.3 g/10 min for PLA/PEG/mCNTs. This proved that the PEG is useful in reducing the brittleness of nanocomposite. The full exfoliation of CNTs and mCNTs in the matrix observed from the X-ray diffraction analysis supported the excellent hardness and MFI properties. These nanocomposites also showed high thermal stability as obtained from differential scanning calorimetry and thermogravimetric analysis studies compared with neat PLA. The morphology study by field emission scanning electron microscopy analysis confirmed these findings through the existence of a smooth fracture surface, especially when PEG was loaded as evidence of good distribution of nanofiller in the matrix was established. Based on all analyses done, PLA/PEG/mCNTs were chosen as the good nanocomposite among others.

The Effect of Carbon Nanotubes-Grafted Lactide on the Mechanical and Thermal Properties of Poly (lactic Acid) Biocomposites

Effects of Bamboo Cellulose Nanowhisker Content on the Morphology, Crystallization, Mechanical, and Thermal Properties of PLA Matrix Biocomposites

Effect of carbon nanotubes on the interface evolution and dielectric properties of polylactic acid/ethylene–vinyl acetate copolymer nanocomposites

Elucidating the plasticizing effect on mechanical and thermal properties of poly(lactic acid)/carbon nanotubes nanocomposites

Synergistic Effects of Multi-Wall Carbon Nanotubes and Polycaprolactone on the Thermal and Mechanical Properties of Polylactic Acid

Enhanced Mechanical, Thermal and Electrical Properties of Additively Manufactured Polylactic Acid/Carbon Nanotube Polymer Nanocomposites

Effect of functionalized multiwalled carbon nanotubes on thermal stability of poly (L-LACTIDE) biodegradable polymer

A facile method for carbon nanotube/carbon fiber‐reinforced polylactic acid composites

Enhanced Mechanical and Photoluminescence Effect of Poly( L -Lactide) Reinforced with Functionalized Multiwalled Carbon Nanotubes

Thermo-mechanical Properties of MWCNT-g-poly (L-Lactide)/poly (L-Lactide) Nanocomposites

Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites

Polylactide/graphite Nanosheets/mwcnts Nanocomposites with Enhanced Mechanical, Thermal and Electrical Properties

Hyperbranched Polyglycidol- Functionalized Carbon Nanotubes Via in Situ Polymerization on the Crystallization Behavior of PLA

Thermo-mechanical properties of MWCNT- g -poly ( l -lactide)/poly ( l -lactide) nanocomposites

Functionalization of multiwalled carbon nanotubes for reinforcing of poly(l-lactide-co-ε-caprolactone) biodegradable copolymers

The influence of multiple modified MMT on the thermal and fire behavior of poly (lactic acid) nanocomposites

Enhanced thermal stability, toughness, and electrical conductivity of carbon nanotube-reinforced biodegradable poly(lactic acid)/poly(ethylene oxide) blend-based nanocomposites

Structure and Properties of Polylactic Acid Biocomposite Films Reinforced with Cellulose Nanofibrils

EFFECT OF CHEMICAL MODIFICATION OF MULTIWALL CARBON NANOTUBES ON THE PROPERTIES OF POLY(LACTIC ACID) COMPOSITE FILMS: SYNTHESIS AND CHARACTERIZATION

Effects of Hyperbranched Polyester-Modified Carbon Nanotubes on the Crystallization Kinetics of Polylactic Acid

Crystallinity of Biodegradable Polymers Reinforced with Functionalized Carbon Nanotubes