Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Experiment Research on Influence Factors of the Separated Heat Pipe System, Especially the Filling Ratio and Freon Types

Experimental study on data center heat pipe air conditioning system

Application of Separated Heat Pipe System in Data Center Cooling

Boiling Heat Transfer Characteristics of the R744 Coolant in the Evaporator of the Separated Heat Pipe System

Experimental and Numerical Investigation on a CO2 Loop Thermosyphon for Free Cooling of Data Centers

Experimental Investigation on Heat Transfer of Microchannel Separate Heat Pipe

Research on energy saving potentials using pure and zeotropic refrigerants in data center cooling systems

Experimental Investigations of the Influence Factors for the Boiling Heat Transfer Characteristics of R134a Coolant in a Loop Thermosiphon System

Application Research for Pump-driven Loop Heat Pipe System Using R32 to Replace R22

Experimental research on boiling heat transfer mechanism of a pump-driven loop thermosiphon for R134a coolant

Experimental Study on Refrigerating System with Plate-fin Evaporator

Flow boiling heat transfer mechanisms and flow characteristics of pump-driven two-phase flow systems used in data center cooling

A Study On A New Auto-Cascade Refrigerating Cycle

Experimental Study on New Variable Composition Heat Pump System

Performance Investigation on the Thermosyphon with Evaporative Condenser for Free Cooling of Data Centers

Experimental study on the effect of filling ratio on an R141b two-phase thermosyphon loop with a horizontal parallel tube evaporator

Modeling and Analysis of Two-Phase Distribution in Large-Scale Separate Heat Pipe

Experimental Study on a Pump Driven Loop-Heat Pipe for Data Center Cooling

ANALYSIS OF THE PERFORMANCE DIFFERENCE OF MEDIUM-HIGH TEMPERATURE REFRIGERANT ON

Characteristics of flow condensation heat transfer for R134a in pump-assisted heat pipe

Modeling and numerical investigation on the effects of filling ratio in a large separate heat pipe loop