Abstract:A cryogenic broadband low noise amplifier (LNA) for quantum applications based on a standard 40-nm CMOS technology is reported. The LNA specifications are derived from the readout of semiconductor quantum bits at 4.2 K, whose quantum information signals are characterized as phase-modulated signals. To achieve broadband input matching impedance and low noise figure, the gate-to-drain capacitance of the input transistor is exploited. The goal is to involve a resistive and capacitive load into the input impedance match of a common-source stage with source inductive degeneration. The capacitive load is created by an LC parallel tank whose resonant frequency is lower than the operating frequency. The achieved non-constant in-band equivalent capacitance is proven to be beneficial to input impedance matching. The resistive part of the load is provided by the transconductance of the cascode stage implicitly. An inductor is added to the gate of the cascode transistor to suppress its noise, and a transformer-based resonator with two resonant frequencies serves as the load of the first stage, thus extending the operating bandwidth. Design considerations for the cryogenic temperature operation of the LNA are proposed and analyzed. The LNA achieves a measured gain ( $S_{21}$ ) of 35 ± 0.5 dB, return loss > 12 dB, and NF of 0.75–1.3 dB across the band (4.1–7.9 GHz), with 51.1-mW power consumption at room temperature, while it shows a measured gain of 42 ± 3.3 dB, and NF of 0.23–0.65 dB with 39-mW power consumption at 4.2 K between 4.6 and 8 GHz. To the best of our knowledge, this is the first report of a cryogenic LNA based on a bulk CMOS process working above 4 GHz showing sub-1-dB NF both at room and cryogenic temperatures.

High Input Impedance Cryogenic Rf Amplifier for Series Nanowire Detector

A Low-Power, Inductorless Wideband Cryogenic Amplifier for Superconducting Nanowire Single Photon Detector

Note: Characterization And Test Of A High Input Impedance Rf Amplifier For Series Nanowire Detector

A 0.32 $\times$ 0.12 mm$^{2}$ Cryogenic BiCMOS 0.1–8.8 GHz Low Noise Amplifier Achieving 4 K Noise Temperature for SNWD Readout

A Cryogenic Sige Low Noise Amplifier Developed for Radio Astronomy

High performance fiber-coupled NbTiN superconducting nanowire single photon detectors with Gifford-McMahon cryocooler

Development of a Low-Power Cryogenic MMIC HEMT Amplifier for Heterodyne Array Receiver Application

NbN superconducting nanowire single photon detector with efficiency over 90% at 1550 nm wavelength operational at compact cryocooler temperature

A low noise and low power cryogenic amplifier for single photoelectron sensitivity with large arrays of SiPMs

A Cryogenic Low-Background Low-Noise CMOS Preamplifier for HPGe Detectors

0.5-8.5 GHz Cryogenic Low Power Consumption Amplifiers for Superconducting SIS Mixer-based Water Vapour Radiometer Applications

A Cryogenic Broadband Sub-1-dB NF CMOS Low Noise Amplifier for Quantum Applications

A Cryogenic CMOS Preamplifier with Very Large Dynamic Range for HPGe Detectors

High Efficiency, Large-Active-area Superconducting Nanowire Single-Photon Detectors

Characteristics Of Low Noise 800mhz Amplifier At Cryogenic Temperature

Superconducting single-photon detector with a system efficiency of 93% operated in a 2.4 K space-application-compatible cryocooler

Cryogenic differential amplifier for NMR applications

Cryogenic Low Noise Amplifier for VHF Band Applied in Superconducting Filter

Design of a Micrometer-Long Superconducting Nanowire Perfect Absorber for Efficient High-Speed Single-Photon Detection

Optical Bias and Cryogenic Laser Readout of a Multipixel Superconducting Nanowire Single Photon Detector

A high frequency SiC nanobeam resonator with ultra-sensitivity