Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

A Review Of Analytical Micromechanics Models On Composite Elastoplastic Behaviour

Analytical Micromechanics Models for Elastoplastic Behavior of Long Fibrous Composites: A Critical Review and Comparative Study

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

Discrete Element Method Models of Elastic and Elastoplastic Fiber Assemblies

A Review on Material Models for Isotropic Hyperelasticity

On micromechanics approach to stiffness and strength of unidirectional composites

An Analytical Nonlinear Model for Plain-Woven Composites under Off-Axis Loads

Constitutive Models for the Structural Analysis of Composite Materials for the Finite Element Analysis: A Review of Recent Practices

Multiscale Computational and Artificial Intelligence Models of Linear and Nonlinear Composites: A Review

MICRO/MACROMECHANICAL PLASTIC LIMIT ANALYSES OF COMPOSITE MATERIALS AND STRUCTURES

Cyclic plastic behavior analysis based on the micromorphic mixed hardening plasticity model

Micromechanics of Thermal Conductive Composites: Review, Developments and Applications

Investigation of the Elastoplastic and Fracture Behavior of Solid Materials Considering Microstructural Anisotropy: A Discrete Element Modeling Study

Micromechanical Modeling of Viscoplastic Behavior of Laminated Polymer Composites with Thermal Residual Stress Effect

Micromechanics based analytical model for composites subjected to combined torsion-compression loading

A thermo-viscoelastic model for particle-reinforced composites based on micromechanical modeling

A Comparative Study of Micromechanical Analysis Models for Determining the Effective Properties of Out-of-Autoclave Carbon Fiber–Epoxy Composites

Micromechanics methods for evaluating the effective moduli of soft neo-Hookean composites

A review of research in macroscopic hardening models in numerical simulation of sheet metal forming

Anisotropic effect of regular particle distribution in elastic-plastic composites: The modified tangent cluster model and numerical homogenization

Review: Advanced computational modelling of composite materials