Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

Micromechanics of Thermal Conductive Composites: Review, Developments and Applications

Review on Modeling of Mechanical and Thermal Properties of Nano- and Micro-Composites

Thermomechanical analysis of the effect of contact forces in heat conduction of composite materials through multiscale contact finite element modeling

Progressive modeling of transverse thermal conductivity of unidirectional natural fiber composites

Analytical Micromechanics Models for Elastoplastic Behavior of Long Fibrous Composites: A Critical Review and Comparative Study

Micromechanics of Composites Reinforced in the Aligned SMA Short Fibers in Uniform Thermal Fields

Studying the Thermomechanical Behavior of Sm Composites with Aligned Sma Short Fibers by Micromechanical Approaches

A thermo-viscoelastic model for particle-reinforced composites based on micromechanical modeling

Multiscale Thermomechanical Modeling of Short Fiber-Reinforced Composites

On micromechanics approach to stiffness and strength of unidirectional composites

Micromechanical Modeling of Viscoplastic Behavior of Laminated Polymer Composites with Thermal Residual Stress Effect

Micromechanical modeling of discontinuous long fiber reinforced composites

Micromechanical modeling of unidirectional composites with random fiber and interphase thickness distributions

Review of thermal conductivity in composites: Mechanisms, parameters and theory

Multiscale Numerical Modeling for Thermal Behavior of Plain-Woven Composites with Interfacial and Internal Defects

Study on mechanical properties and thermal conductivity of 3D short carbon fiber reinforced ultra-high temperature ceramic matrix composites: A novel material performance evaluation model

Multi-scale modeling: Finite element analysis of the thermophysical properties of carbon/carbon composites considering manufacturing defects and porosity at high temperature

Micromechanics of Composites with Interface Effects

A Micromechanical Model for Interpenetrating Multiphase Composites

A New and General Formulation of Three-Dimensional Finite-Volume Micromechanics for Particulate Reinforced Composites with Viscoplastic Phases

Review of Methods for Enhancing Interlaminar Mechanical Properties of Fiber-Reinforced Thermoplastic Composites: Interfacial Modification, Nano-Filling and Forming Technology