Abstract:For rubber-like materials, there are three popular methods of equibiaxial tension available: inflation tension, equibiaxial planar tension, and radial tension. However, no studies have addressed the accuracy and comparability of these tests. In this work, we model the tension tests for a hyperelastic electroactive polymer (EAP) membrane material using finite element method (FEM) and investigate their experimental accuracy. This study also analyzes the impact of apparatus structure parameters and specimen dimensions on experimental performances. Additionally, a tensile efficiency is proposed to assess non-uniform deformation in equibiaxial planar tension and radial tension tests. The sample points for calculating deformation in inflation tensions should be taken near the top of the inflated balloon to obtain a more accurate characteristic curve; the deformation simulation range will be constrained by the material model and its parameters within a specific limit (λ ≈ 1.9); if the inflation hole size is halved, the required air pressure must be doubled to maintain equivalent stress and strain values, resulting in a reduction in half in inflation height and decreased accuracy. The equibiaxial planar tension test can enhance uniform deformation and reduce stress errors to as low as 2.1% (at λ = 4) with single-corner-point tension. For circular diaphragm specimens in radial tension tests, increasing the number of cuts and using larger punched holes results in more uniform deformation and less stress error, with a minimum value of 3.83% achieved for a specimen with 24 cuts and a 5 mm punched hole. In terms of tensile efficiency, increasing the number of tensile points in the equibiaxial planar tension test can improve it; under radial tension, increasing the number of cuts and decreasing the diameter of the punched hole on the specimen has a hedging effect. The findings of this study are valuable for accurately evaluating various equibiaxial tension methods and analyzing their precision, as well as providing sound guidance for the effective design of testing apparatus and test plans.

Effect of Strain Rate on Tension Response of Filled Silicone Rubber

Tension Testing of Silicone Rubber at High Strain Rates

Tension behavior of filled silicone rubbers at different temperatures

HIGH-RATE TENSILE BEHAVIOR OF SILICONE RUBBER AT VARIOUS TEMPERATURES

Experimental Studies on Concrete Filled Steel Tubes under High Strain Rate Loading

Split-Hopkinson Pressure Bar Test of Silicone Rubber: Considering Effects of Strain Rate and Temperature

Tension responses of carbon black filled rubbers at intermediate and high strain rates: Experimental investigation and modeling

A novel Hopkinson tension bar system for testing polymers under intermediate strain rate and large deformation

Effect of the temperature and strain rate on the tension response of uncured rubber: Experiments and modeling

Strain-sensitive electrical conductivity of carbon nanotube-graphene-filled rubber composites under cyclic loading.

Investigation of Effect of Temperature and Strain Rate on Mechanical Properties of Underfill Material by Use of Microtensile Specimens

High Strain-Rate Tensile Experiment on Polycarbonate Bar

On the Development of New Test Techniques to Measure the Tensile Response of Materials at High and Ultra-high Strain Rates

An innovative tensile test method to evaluate the effect of the loading rate on viscoelastic interfaces

Research on Dynamic Compression Testing of Silicone Rubber under Different Temperatures

Experimental Investigation and Constitutive Modeling of Uncured Carbon Black Filled Rubber at Different Strain Rates

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite

Mechanical Response of Shear Thickening Fluid Filled Composite Subjected to Different Strain Rates

Simulation Analysis of Equibiaxial Tension Tests for Rubber-like Materials

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

Experimental Technique of High Strain-Rate Tension Based on Hopkinson Bar