Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Advanced High Torque Density Non-Overlapping Winding PM Vernier Machines

Comparison of Optimal Design and Performance of PM Machines Having Non-Overlapping Windings and Different Rotor Topologies

Design and Electromagnetic Performance Analysis of Novel Dual-Armature Π-Core Doubly Salient Permanent Magnet Machines

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Comparison of Dual 3-Phase Modular Permanent Magnet Machines with Overlapping/Non-overlapping Windings and Redundancy

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

Influence of Key Parameters on Torque to Mass Ratio in Surface-Mounted PM Machines with Non-Overlapping Windings

Comparative Study of Modular Dual 3-phase Permanent Magnet Machines with Overlapping/Non-overlapping Windings

Analysis of Dual PM Vernier Machines with Different Consequent-Pole PM Topologies

Design of a Chamfered Structure on Consequent-Pole Vernier Permanent-Magnet Machine

Research on the Influence of End Turn Length on Consequent-Pole Vernier Permanent-Magnet Machines

A Novel Dual Permanent Magnet Fault-Tolerant Vernier Machine with Hybrid Stator Configuration

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Design Considerations, Analysis and Comparison for High-performance Surface Permanent Magnet Vernier Machines

Design and Research of Novel Consequent-Pole Dual PM Vernier Machines with Spoke and Halbach Array

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

A Novel Concentrated-Winding Vernier Pseudo-Direct-Drive Permanent-Magnet Machine

Analysis of Dual-Armature Flux Reversal Permanent Magnet Machines with Halbach Array Magnets

A Novel Axially Magnetized Vernier Permanent-Magnet Machine