Abstract:The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe-soil interaction and thermal insulation. Due to the small-amplitude oscillations driven by the sea state as well as lay vessel motions, the as-laid embedment is significantly greater than the predictions derived from static penetration analyses. This paper presents a numerical study into the cyclic embedment behavior of deep-water pipelines in soft clay using a recently developed sequential limit analysis (SLA) technique. It directly models the evolution of model geometry and material properties through a consecutive series of small displacement analyses and incorporates the effect of strain softening and strain rate on soil strength. A rigid plane-strain pipe section is pushed-in-place and then subjected to small-amplitude cyclic lateral displacements, with an accumulated lateral pipe displacement of up to 60 diameters. Careful comparisons between the numerical results with published centrifuge data are provided to demonstrate the robustness of SLA, in terms of pipe invert trajectory and soil resistance, followed by an extensive parametric study investigating the effect of strain rate, strain softening, oscillation amplitude, and loading history. More detailed aspects of the cyclic loading behavior are discussed with reference to soil failure mechanisms and bearing capacity yield envelopes. A strong correlation between accumulated lateral pipe displacement and pipe embedment is identified, regardless of the varying oscillation amplitudes, and soil buoyancy is found to play the most significant role in determining the final pipe embedment. The present study aims to assist the development of a macro-element plasticity pipe-soil model that can be incorporated into simplified three-dimensional (3D) pipeline-seabed models, as well as to promote the application of SLA to model complex large-displacement pipe-soil interaction problems.

The Longitudinal Response of Buried Large-Diameter Reinforced Concrete Pipeline with Gasketed Bell-and-spigot Joints Subjected to Traffic Loading

Elasto-plastic Solution for Tunnelling-Induced Nonlinear Responses of Overlying Jointed Pipelines in Sand

Tunnelling-induced Response of a Jointed Pipeline and Its Equivalence to a Continuous Structure

Tunnelling-induced Nonlinear Responses of Continuous Pipelines Resting on Tensionless Winkler Foundation

The Behaviour of Jointed Large-Diameter Reinforced Concrete Pipeline Buried in Various Ground Conditions

An analytical solution for landslide impact on buried continuous pipelines

Tunnelling-induced response of buried pipelines and their effects on ground settlements

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Centrifuge Testing to Simulate Buried Reinforced Concrete Pipe Joints Subjected to Traffic Loading

The Influence of Erosion Voids on the Longitudinal Behaviour of a Jointed Large-Diameter Reinforced Concrete Pipeline

Pipeline Lateral Buckling Triggered by the Residual Curvature with Tri-Linear Axial Pipe-Soil Interaction

Prediction for Response of Adjacent Pipelines Induced by Pipe Jacking Construction

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

CENTRIFUGE MODELING OF LARGE DIAMETER UNDERGROUND PIPES SUBJECTED TO HEAVY TRAFFIC LOADS

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Influence of Erosion Voids and Traffic Loads on Buried Large-Diameter Reinforced Concrete Pipes

Research on upper pipeline-soil interaction induced by shield tunnelling

3D FEM ANALYSIS ON DEFORMATION OF PERPENDICULARLY CROSSING BURIED PIPELINE IN PIPE JACKING

Longitudinal response of buried pipeline under non-uniform seismic excitation from multi-point shaking table tests