Abstract:Thermochemical remediation of petroleum-contaminated soil (PCS) has attracted increased attention. Pyrolysis is one of an important thermochemical treatment technology. The pyrolysis behavior of PCS and the main gaseous products evolved were investigated by means of a simultaneous thermogravimetric analyzer (TG) coupled with Fourier transform infrared spectrometry (FTIR) and mass spectrometry (MS). Pyrolysis residue characteristics were determined by X-ray photoelectron spectrometry (XPS), FTIR, and X-ray diffraction (XRD). The results revealed that the pyrolysis process of PCS was divided into water evaporation, volatilization of light volatile, degradation of low/high boiling point organic matters, and decomposition of inorganic mineral. The increase of heating rate would lead to the shift of thermal profiles to a higher temperature region and the increase of mass loss rate, without changing the patterns of thermal degradation of PCS. In addition, CO2, the most important gaseous product, was released in two temperature regions of 700–1090 K and 1090–1220 K. The trace pollution gaseous product SO2 was discharged above 1100 K. After pyrolysis, the organic matters were significantly reduced, and the inorganic minerals such as CaCO3 and BaSO4 were decomposed. The sulfur in PCS mainly existed in the form of sulfate-S, sulfonic acid-S or sulfone-S, sulfoxide-S, aromatic-S, and aliphatic-S. During pyrolysis, sulfate-S was continuously decreased, while the other four forms of organic-S may be transformed into each other and finally partially stabilized in the pyrolysis residue.

Thermal Desorption for Remediating PCB-contaminated Soil

Thermochemical Remediation of Petroleum-Contaminated Soil: TG-FTIR-MS Analysis and Residue Characteristics

Effect of temperature and particle size on the thermal desorption of PCBs from contaminated soil

Effects of Thermal Desorption Temperature Up to 500°C on the Thermophysical Properties and Fertility of Soil in Organic-Contaminated Sites

Disturbance and Restoration of Soil Microbial Communities after In-Situ Thermal Desorption in a Chlorinated Hydrocarbon Contaminated Site.

Removal of Pollutants from High Polychlorinated Biphenyl Level Contaminated Soil at Different Thermal Treated Time

Thermal Desorption for Remediation of Contaminated Soil: A Review.

Combined mechanochemical and thermal treatment of PCBs contaminated soil

Thermal desorption of PCB-contaminated soil with sodium hydroxide

Mechanochemical Remediation of 3,4,3′,4′-Tetrachlorobiphenyl (PCB77) Contaminated Soil by Ball Milling and a Novel Technology Combining Ball Milling with Dielectric Barrier Discharge

Remediation of PCB-contaminated Soil Using a Combination of Mechanochemical Method and Thermal Desorption

Analysis of thermal processing applied to contaminated soil for organic pollutants removal

Thermal Desorption of PCBs Contaminated Soil with Calcium Hydroxide in a Rotary Kiln

Recent Developments in Organic Contaminated Soil Remediation with the Use of Thermal Desorption Technology

Investigation on drying and emission performances of PCBs contaminated soil during thermal desorption pretreatment process

Influence of Thermal Desorption Technology on Removal Effects and Properties of PAH-Contaminated Soil Based on Engineering Experiments

Thermal Reduction-Desorption of Cadmium from Contaminated Soil by a Biomass Co-Pyrolysis Process

Thermal desorption of PCBs from contaminated soil with copper dichloride

In situ remediation technologies for PCB-contaminated soils

Suppression of PCDD/Fs During Thermal Desorption of PCBs-contaminated Soil

Effect of carrier gas flow rate and heating rate on thermal desorption of polychlorinated biphenyls in contaminated soil