Abstract:A novel conductive heating method using solar energy for soil remediation was introduced in this work. Contaminated industrial heritage sites will affect the sustainable development of the local ecological environment and the surrounding air environment, and frequent exposure will have a negative impact on human health. Soil thermal desorption is an effective means to repair contaminated soil, but thermal desorption is accompanied by a large amount of energy consumption and secondary pollution. Therefore, a trough solar heat collection desorption system (TSHCDS) is proposed, which is applied to soil thermal desorption technology. The effects of different water inlet temperature, water inlet velocity and soil porosity on the evolution of soil temperature field were discussed. The temperature field of contaminated soil can be numerically simulated, and a small experimental platform is built to verify the accuracy of the numerical model for simulation research. It is concluded that the heating effect is the best when the water entry temperature is the highest, at 70 °C, and the temperature of test point 4 is increased by 50.71% and 1.42%, respectively. When the inlet water flow rate is increased from 0.1 m/s to 0.2 m/s, the heating effect is significantly improved; when the inlet water flow rate is increased from 0.5 m/s to 1.5 m/s, the heating effect is not significantly improved. Therefore, when the flow rate is greater than a certain value, the heating effect is not significantly improved. The simulation analysis of soil with different porosity shows that larger porosity will affect the thermal diffusivity, which will make the heat transfer effect worse and reduce the heating effect. The effects of soil temperature distribution on the removal of petroleum hydrocarbon C6–C9 and trichloroethylene (TCE) were studied. The results showed that in the thermal desorption process of petroleum hydrocarbon C6–C9-contaminated soil, the removal rate of pollutants increased significantly when the average soil temperature reached 80 °C. In the thermal desorption of trichloroethylene-contaminated soil, when the thermal desorption begins, the soil temperature rises rapidly and reaches the target temperature, and a large number of pollutants are removed. At the end of thermal desorption, the removal of both types of pollutants reached the target repair value. This study provides a new feasible method for soil thermal desorption.

Removal of Pollutants from High Polychlorinated Biphenyl Level Contaminated Soil at Different Thermal Treated Time

Thermal Desorption for Remediating PCB-contaminated Soil

Thermochemical Remediation of Petroleum-Contaminated Soil: TG-FTIR-MS Analysis and Residue Characteristics

Disturbance and Restoration of Soil Microbial Communities after In-Situ Thermal Desorption in a Chlorinated Hydrocarbon Contaminated Site.

Effects of Thermal Desorption Temperature Up to 500°C on the Thermophysical Properties and Fertility of Soil in Organic-Contaminated Sites

Mechanochemical Remediation of 3,4,3′,4′-Tetrachlorobiphenyl (PCB77) Contaminated Soil by Ball Milling and a Novel Technology Combining Ball Milling with Dielectric Barrier Discharge

Effect of temperature and particle size on the thermal desorption of PCBs from contaminated soil

Combined mechanochemical and thermal treatment of PCBs contaminated soil

Analysis of thermal processing applied to contaminated soil for organic pollutants removal

Remediation of PCB-contaminated Soil Using a Combination of Mechanochemical Method and Thermal Desorption

Thermal desorption of PCB-contaminated soil with sodium hydroxide

Effect of carrier gas flow rate and heating rate on thermal desorption of polychlorinated biphenyls in contaminated soil

Thermal desorption of PCBs from contaminated soil with copper dichloride

Thermal Desorption of PCBs from Contaminated Soil Using Nano Zerovalent Iron.

Effect of oxygen content on the thermal desorption of polychlorinated biphenyl-contaminated soil

Suppression of PCDD/Fs During Thermal Desorption of PCBs-contaminated Soil

Investigation on drying and emission performances of PCBs contaminated soil during thermal desorption pretreatment process

High-temperature electrothermal remediation of multi-pollutants in soil

In Situ Conductive Heating for Thermal Desorption of Volatile Organic-Contaminated Soil Based on Solar Energy

Effect of Carrier Gas Flow Rate in Thermal Desorption Process of Pcbs Contaminated Soil

Investigation of thermal desorption characteristics and pilot-scale study of polycyclic aromatic hydrocarbons (PAHs)-contaminated soil during cement manufacturing