Abstract:Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for mixed ductile-brittle failure modes is formulated and used to investigate the effect of precipitate morphology and size distribution on damage evolution in aluminum alloys. A thermodynamically consistent framework for elastic and plastic work dissipation in the fracture process zone is used to formulate the coupled constitutive behavior for brittle and ductile damage, respectively. Representative Volume Elements (RVE) with varying particle morphology and orientation were generated and their uni-axial loading was simulated to assess the damage resistance of the different model microstructures. For critical energy release rate $G_c$ values of the aluminum matrix ranging from 4 to 8~Jm$^{-2}$ for single crystals and from 10 to 16~Jm$^{-2}$ for polycrystals, the model predicts a change in failure modes from particle debonding to cracking followed by ductile matrix failure. The change of particle failure mechanism as a result of increased $G_c$ is observed for both, single and polycrystalline model microstructures. For the case of particle debonding, microstructures with circular or ellipsoidal particles (with the major axis perpendicular to the loading direction) show a higher ductility and fracture work compared to the other studied cases. In the case of particle cracking, microstructures with ellipsoidal particles aligned parallel to the loading axis show a higher ductility and fracture work among the investigated cases. The simulations qualitatively reproduce the experimentally observed particle failure mechanisms (cracking and debonding) for two different matrix alloy classes (commercially pure and 2xxx alloys) reinforced with ceramic particles.

Fractal Size Distribution of Debris of Al-Based Nanocrystalline Alloy Fractured in A Wide Strain-Rate Range

Damage Characteristics of Aluminum Nanorod under Hypervelocity Impact

Dynamic Fracture in Brittle Solids at High Rates of Loading

Analysis of fragment size and ejection velocity at high strain rate

Dynamic Mechanical Behavior and Hypervelocity Impact Performance of an Al-Based Nanocrystalline Alloy

Strain Rate-Dependent Constitutive and Low Stress Triaxiality Fracture Behavior Investigation of 6005 Al Alloy

Influence of the strain rates on tensile properties and fracture interfaces for Mg-Al alloys containing Y

Grain Size Dependent Plastic Behaviour in Bulk Nanocrystalline FeAl

Real-time Atomic Deformation Behavior of Nano CoCrCuFeNi High-Entropy Alloy

Mapping the Strain-Rate and Grain-Size Dependence of Deformation Behaviors in Nanocrystalline Face-Centered-cubic Ni and Ni-based Alloys

A New Insight into Ductile Fracture of Ultrafine-Grained Al-Mg Alloys

Fracture Behavior of Precracked Nanocrystalline Materials with Grain Size Gradients

Phase-Field Modeling of Coupled Brittle-Ductile Fracture in Aluminum Alloys

Influence of grain size distribution on the mechanical behavior of light alloys in wide range of strain rates

Fracture Behavior 91% Tungsten Alloys

Flow and Fracture Behavior of Aluminum Alloy 6082-T6 at Different Tensile Strain Rates and Triaxialities

Tensile mechanical behavior of TiAl(FL) at high strain rate

Fractal Analysis of Mo and Nb Effects on Grain Boundary Character and Hot Cracking Behavior for Ni-Cr-Fe Alloys

Simulation of Fracture of Nanocrystalline Metals

Fracture feature and its multi-scale fractal research on functionally gradient material Al-Fe alloy

Effects of deformation parameters and stress triaxiality on the fracture behaviors and microstructural evolution of an Al-Zn-Mg-Cu alloy